65

65



Removal


CYLINDER HEAD


Disassembly


1.    Remove timing belt.

After removing timing belt, do not rotate crankshaft and camshaft separately to prevent contact between pistons and valves.

2.    Remove oil pump idler gear.



3. Remove cylinder head.

Loosen bolts in two or three steps.



©(DO®®

SEM980


If cylinder head is difficult to separate, pry with a screwdriver between head salience and błock.


1. Remove thermostat housing.


SEM030 8


2. Remove camshaft pulley.



3. Remove bolt stopper.


Bolt stopper

SEM99C

SEM038A



Wyszukiwarka

Podobne podstrony:
TIMING BELT •    Do not bend or twist the timing belt. •    After remo
Rozrzad 4 ENGINE-’L’SERIES 24.    Remove timing belt tensioner access pług from 
MR293R190(0 1 BKHOML After removing the trim, removes - the lower rubbing strip; Free pad (3) on the
82673 Suzuki RM125v CYLINDER. PISTON AND EXHAU$T VALVE 6-3ENGINE TOP SIDECYLINDER HEAD REMOVAL ♦ &nb
83168 MR293R19059 1 After partially removing the trim from the rear wheel arches, reirove: - after
10 Orazgozel Esenoya One thing we know about seeds is that they do not germinate immediately after t
16719 productspage Do not remove this image unless you know what you are doing visit http://docs.get
BODY END AND DOOR-Rear Door-•    When removing door. be surę not to scratch vehicle b
89 TransAlp Manual Engine Removal Installation 6 2 ENGINE REMOVAL/INSTALLATIONENGINE REM0VAL CAUTION
16719 productspage Do not remove this image unless you know what you are doing visit http://docs.get
Book crepus9 tVW.LIONANDLAMBLOVE.ORG // DO NOT REMOVE THIS TAG // HTT
Book crepus6 http://WWWIIONANDIAMBLOVE.ORG // DO NOT REMOYE THIS TAG // HTTP^/WWWLIONANDIAMBLOVE.OR
productspage Do not remove this image unless you know what you are doing visit http://docs.getshoppe
*ENGINE MAINTENANCEBefore Engine Starts (Cont d) REPLACING TIMING BELT Removal 1.    

więcej podobnych podstron