84

84



SERVICE DATA AND SPECIFICATIONS (S.D.S.)

Inspection and Adjustment (Cont'd)

VALVE


Unit: mm (in)


Valve spring


T (Margin thickness)


SEM188


Free height    mm (in)    46.70(1.8386)

Pressure height    28.5/545.3

mm/N (mm/kg, in/lb) (28.5/55.6, 1.122/122.6)

Assembled height    37.0/161.8

mm/N (mm/kg, in/lb)    (37.0/16.5, 1.457/36.4)

Out of square "S" mm (in)    2.0 (0.079)


MA12


Valve guide

Unit: mm (in)


Valve head diameter "D" Intake

Exhaust


35 (1.38) 30(1.18)


Valve guide

Outer diameter


Standard


Seryice


Valve length "L" Intake

Exhaust


109.4 - 110.0 (4.3071 -4.3307)

108.9-109.5 (4.2874 - 4.3110)


Valve stem diameter "d"

Intake    6.970-6.985(0.2744-0.2750)

Exhaust    ,    6.945-6.960(0.2734 - 0.2740)

Valve seat angle "ot"

Intake

45° 15’ - 45°45’

Exhaust


Valve margin "T" Limit

Valve stem end surface grinding limit


0.5 (0.020) 0.2 (0.008)


11.023- 11.034    11.223- 11.234

(0.4340 - 0.4344)    (0.4418 - 0.4423)


Valve guide

Inner diameter [Finished size]


7.005 - 7.020 (0.2758 - 0.2764)


Cylinder head valve guide 10.960-10.978    11.160-11.178

hole diameter    (0.4315 - 0.4322)    (0.4394 - 0.4401)


Interference fit of valve guide


0.045 -0.074 (0.0018-0.0029)


Standard    Max. tolerance


Stem to guide cie3rance


Intake


Exhaust


0.015-0.045

(0.0006-0.0018)

0.045 - 0.075 (0.0018-0.0030)


0.1 (0.004)


Valve clearance

Intake

Exhaust


(Hot)

0.25 (0.0098) 0.30 (0.0118)


(Cold)

♦0.18 (0.007) *0.25 (0.010)


Valve deflection limit


0.2 (0.008)


* At ambient temperaturę 20°C (68°F). After checking valve clearance while engine is cold, also check it when engine is hot to see if it remains within the specified value. If it does not, readjust it.



Wyszukiwarka

Podobne podstrony:
SERVICE DATA AND SPECIFICATIONS (S.D.S.)__Inspection and Adjustment (Cont d)- Main journal inner
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
Valve seatSERVICE DATA AND SPECIFICATIONS (S.D.S.)_Inspection and Adjustment (Cont d)_ INTAKE 1.5
SERVICE DATA AND SPECIFICATIONS (S.D.S.)_Engine Maintenance_iNSPECTION AND ADJUSTMENT Basic mechanic
SERVICE DATA AND SPECIFICATIONS (S.D.S.)-iiispeciion and Aujusimem(Cont d) REAR BRAKE Unit: mm
SERVICE DATA AND SPECIFICATIONS (S.D.S.) General SpecificatlonsInspection and Adjustment Cylinder
SERVICE DATA AND SPECIFICATIONS (S.D.S.)-Chassis and Body Maintenance--(Cont d) TIGHTEIMING
SERVICE DATA AND SPECIFICATIONS (S.D.S.)General Specifications__Specifications and Adjustment_ Vehic
SERVICE DATA AND SPECIFICATIONS (S.D.S.) TIGHTENING TOROUEGENERAL SPECIFICATIONS Suspension
SERVICE DATA AND SPECIFICATIONS (S.D.S.) Tightening TorgueGeneral Specifications Steering gear
SERVICE DATA AND SPECIFICATIONS (S.D.S.) TIGHTENING TORQUE_Tightening Torque-Engine internal
IGNITION SYSTEM —Distributor—-Service Data and Specifications
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Tightening Torgue__ Item N-m kg-m ft-lb Wheel
IMANUAŁ STEERING GEAR AND LINKAGE — R22T_Assembly and Adjustment (Cont d)_ Oil seal side 6. Install
MANUAŁ STEERING GEAR AND LINKAGE — R22T _Assembly and Adjustment (Cont d)_ _L____ _,_,_ i a ........
MANUAŁ STEERING GEAR AND LINKAGE — R22T_Assembly and Adjustment (Cont d)_ 561 A 98 N (10 kg. 22 Ib)
FRONT AXLE — Wheel Hub and Knuckle— Assembly and Adjustment (Cont d)..Installation.8. Measure bearin
23501 Suzuki RM125!5 18-4 SEFWICING INFORMATIONELECTRICAL Unit: mm (in) ITEM SPECIFICATION NOTĘ I

więcej podobnych podstron