plik


ÿþCarProg user manual Powering up the device. CarProg can be used with external power supply (+7 - +12V stabilized), only with USB connection or with diagnostic cable ( for ex. OBDII) " Standard power socket (positive in the middle) voltage in range +7& 14V stabilized can be used in any cases. Use it when +12V voltage is required (Transponder read/write, some MCU`s read/write) " USB power from PC - 5V, 100mA. Always must be connected because USB cable is used for Device  PC communication. Is enough for small power consumption operations (i.e. EEPROM read/write) 1 " Using standard Car diagnostic Cable Installing software. Copy software from CD or from your support page on www.codecard.lt to any directory on your PC. Main CarProg file can be older version, just click on Update-Internet and CarProg will by updated automatically. 2 After update CarProg software must restart automatically and CarProg hardware update must be done. Don t disconnect CarProg USB cable while update process. If updates fail, try again. 3 4 5

Wyszukiwarka

Podobne podstrony:
CARPROG Opel ECU programmer user manual
WinAVR user manual
FX2N 232 IF User s Manual JY992D66701
Binatone SC2050 User Manual
User Manual
all100 user manual
ROCK SHOX REBA 2005 User Manual
sailor vhf rt2048 user manual
user manual MAZDA PREMACY E
VMU SPH M575 Restore Spanish User Manual
ucandas vdm user manual
Extech 430 USER MANUAL
NMS KD 0017 en V01 03 N3000 IMC and ISC User Manual
PRDM 0010 Upgrade user manual UPG 0001
INPA User manual
INPA User manual

więcej podobnych podstron