5441336732

LABORATORIUM JARINGAN KOMPUTER

JURUSAN TEKNIK ELEKTRO - INFORMATKA FAKULTAS TEKNIK UNIVERSITAS ISLAM MALANG 2009-2010

MODUŁ III

DYNAMIC ROUTING USING RIP, IGRP AND EIGRP

VII. DESCRIPTION (MATERI)

1.    Objectives

Objective: Configure RIP, IGRP, and EIGRP on the network

•    Delete static routes from routing table

•    Configure dynamie routing protocol, include RIP, IGRP and EIGRP

•    Change metrics on routers

2.    Background Reading

Go to the Cisco website, or use the Cisco Sybex publication, and read about static routes, RIP, IGRP, and EIGRP routing and changing router metrics. Also, read the man pages on traceroute.

VIII.    BEGINNING ASSESMENT (TUGAS PENDAHULUAN )

1.    Describe the Dynamie Routing ?

2.    Describe RIP and give the example ?

3.    Describe IGRP and give the example ?

4.    Describe EIGRP and give the example ?

IX.    PRACTICUM (PRAKTIKUM)

A.    REQUIRED EQUIPMENT(ALAT & BAHAN)

1.    Two established LANs

2.    Multiple routers depend on router specification, chek your router list in Boson Network Designer

3.    Cables (not used in virtual lab)

B.    PROCEDURĘ LIKE IN LAB 2(LANGKAH-LANGKAH)

Use the diagram of sample lab C in Lab 2 untuk do exercises in this lab session.

1. Delete Static Routes

a)    Check the routing table to determine which routes are static.

b)    Before activating a dynamie routing protocol remove static routes from the routing table. Explain why this is or isn’t necessary.

c)    Using the ip route command, individually remove all static routes at each router.

This procedurę must be done in configuration modę.

router> enable