5441336747

LABORATORIUM JARINGAN KOMPUTER

JURUSANTEKNKELEKTRO- INFORMATIKAFAKULTAS TEKNTK UNIYERSITAS ISLAM MALANG 2009-2010

d) On network 192.168.1.0 ping broadcast address 192.168.1.255 to make surę the HUB/Switch is working. Repeat the procedurę for network 192.168.2.0 # ping -c 2 -b 192.168.1.255

Sample Lab B

2. Configure Minicom in Linux, try to use Hyperterminal with your self. Minicom is used to interface with the router.

a)    Verify that minicom has the correct parameters

# minicom —s

b)    Set the default parameters to:

•    9600 baud ratę

•    no parity

•    8 data bits

•    one stop bit

•    no flow control

c)    Type minicom to establish a connection to the router.

•    minicom

Notę that you have make rollover cable to connect serial port of PC to Console port of Cisco router.

3.    Configure your Cisco router using Simulator. Cisco Router References give you best way to connect to the Console, Login and configure your router. If you don’t have a book, please read your Bosen Network Simulator Help, noooow!.

4.    Physical setup #2, use your Network Designer first before Network Simulator. And set up the physical connections as in the following diagram

5.    Configure interfaces on routers.

a) Read about router serial connections to understand the additional configuration parameters.

7