IO Subsystem Functions, Volume Administration, Load ERICSSON ///  Example 302/1013-FCK 114 62 Uen, A COMMAND DESCRIPTION  Uppgjord - PreparedETXMALS Faktaansvarig - Subject responsibleEEI/SPH HAXE Nr - No17/190 82-CNZ 123 9999 Uen Dokansv/Godk - Doc respons/ApprovedUAB/K/UEC (Henrik Almeida) Kontr - CheckedEEIGCN Datum - Date1996-09-11 RevA File  INVOLIO Subsystem Functions, Volume Administration, Load 1   Format 1.1   Command INVOL:NODE=node,IO=io[,VOL=vol][,FORMAT=format][,LCAT]; 1.2   Parameters FORMAT=formatFormat name (magnetic tape only) Identifier 1 - 12 characters AXIBMAXIBM format AXISOAXISO format BTBritish Telecom format FRFrench format STANDARDStandard format (default) USAUS format IO=ioInput/Output (IO) device Expressed as dt-n where: dtIO device type Identifier 1 - 7 characters nIO device number Numeral 0 - 255 LCATLoad catalogueIf this parameter is specified, the magnetic tape file catalogue will be loaded into the memory (magnetic tape only). NODE=nodeNode Identifier A - P VOL=volVolume Identifier 1 - 12 characters 2   Function This command loads (opens) a volume on a removable medium, such as magnetic tape or disk. This command is received in a Support Processor (SP). It must have been preceded by one of the path building commands INMCT or INMIT. A valid volume label must exist on the medium. Such a label can be defined when formatting or scratching the medium. If parameter VOL is used, a check is made that the correct volume has been inserted into the device. Parameter FORMAT only applies for magnetic tape volumes. The volume is mounted according to the format specified, if the format exists in the exchange. Other formats may be added. The default value is STANDARD . For a flexible disk, the volume is mounted according to the format used when the medium was formatted. Parameter LCAT loads the file catalogue on magnetic tape volumes into the primary memory. Its purpose is to speed up a subsequent file opening on the volume. Loading of the file catalogue takes a long time. The parameter is only applicable for magnetic tape volumes. The order remains after system restart. 3   Examples 3.1   Example 1 INVOL:NODE=A,IO=MT-1,FORMAT=BT; A volume is mounted on IO unit MT-1 in node A. The British Telecom labelling format is used. 3.2   Example 2 INVOL:NODE=A,IO=FD-1; A volume is mounted on IO unit FD-1 in node A. 4   Printouts 4.1   Check Printout Not relevant. 4.2   Procedure Printouts ORDERED NOT ACCEPTED fault type fault type FUNCTION BUSY         The function is busy. FORMAT ERRORdetails         The command was incorrectly specified. UNREASONABLE VALUEdetails         The parameter was specified with an unreasonable value. FAULT CODE 24 TIMEOUT EXPIRED The remotely allocated command program does not give an answer using the current command. The connection has been broken. FAULT CODE 25 ILLEGAL PARAMETER COMBINATION Existing but incompatible parameters or parameter values were used when mounting the disk on the Flexible Disk (FD) device. 4.3   Answer Printouts - 4.4   Result Printouts VOLUME LOADED 5   Logging Fault type:. 6   Command Category Group The authority depends on the category group of the path-building command. The category group within the support processor is F 7   Command Receiving Block SEC7 8   Glossary AXIBM AXE for IBM AXISO AXE for ISO FD Flexible Disk IO Input/Output SP Support Processor 9   References 10   Command Descriptions INMCT IO Subsystem Functions File Management Functions Change, Transfer INMIT IO Subsystem Functions, File Management Functions, Initiate, Transfer