VOLUME LOADED ERICSSON ///  Example 313/1013-FCK 114 62 Uen, A PRINTOUT DESCRIPTION  Uppgjord - PreparedETXMALS Faktaansvarig - Subject responsibleEEI/SPH HAXE Nr - No9/190 83-123 9999 Uen Dokansv/Godk - Doc respons/ApprovedUAB/K/UEC (Henrik Almeida) Kontr - CheckedEEIGCN Datum - Date1996-11-15 RevA File  VOLUME LOADED 1   Format 1.1   Printout VOLUME LOADED / \ |EXECUTED | | | + + |NOT EXECUTED| |faulttype | \ / VOLUME NODE IO FORMAT volume node io format 1.2   Parameters formatFormat name ioInput/Output (IO) device identity nodeNode identity volumeVolume name Fault type: FAULT CODE 21 THE VOLUME NAME IS ALREADY USED The volume name is already used. FAULT CODE 24 ILLEGAL NODE OR ILLEGAL IO DEVICE The node or IO device specified is not allowed. FAULT CODE 27 THE VOLUME WAS NOT FOUND ON THIS IO-UNIT The volume was not found on this IO unit. FAULT CODE 29 THE VOLUME IS NOT AVAILABLE The volume or the device is not available. FAULT CODE 32 ILLEGAL MEDIA FORMAT OR NO MEDIA INSERTED The media format is not allowed or no media was inserted. FAULT CODE 39 FORMAT NAME UNKNOWN The format name is unknown. FAULT CODE 43 VOLUME IS ALREADY OPEN The volume is already open. FAULT CODE 83 SYNTAX FAULT IN TAPE FORMAT DESCRIPTION A syntax fault occurred in the tape format description. 2   Function This printout is received as a result printout to command INVOL. It indicates the loaded volume. 3   Action - 4   Printout Type Result printout 5   Printout Block SEC7 6   Glossary IO Input/Output 7   References 8   Command Descriptions INVOL IO Subsystem Functions Volume Administration, Load