Frame Handler, Data Link Connection, Print ERICSSON ///  Example 306/1013-FCK 114 62 Uen, A COMMAND DESCRIPTION  Uppgjord - PreparedETXMALS Faktaansvarig - Subject responsibleEEI/SPH HAXE Nr - No7/190 82-CNT 123 9999 Uen Dokansv/Godk - Doc respons/ApprovedUAB/K/UEC (Henrik Almeida) Kontr - CheckedEEIGCN Datum - Date1996-11-04 RevA File  FHDLPFrame Handler, Data Link Connection, Print 1   Format 1.1   Command / \ |DEV=dev | FHDLP:+ +; |SNB=snb...| \ / 1.2   Parameters DEV=devFrame Handler Concentrator (FHC) device Expressed as FHC-n where: FHCDevice type nDevice number Numeral 0 - 65535 The maximum value is defined by Size Alteration Event (SAE) 500 in block FHC. SNB=snbSubscriber number Numeral 1 - 20 digits 2   Function This command prints the data link connection identifier information including link identification code 2 and 3, for a FHC device or for the specified subscriber numbers. Answer printout FRAME HANDLER DATA LINK CONNECTION DETAILS is received. If parameter DEV is specified, the FHC twin device, the Frame Handler Local (FHL) device, the ISDN basic access, and its subscriber numbers are also printed. If parameter SNB is specified, the device connected to the subscriber number, the FHL device, the FHC, and its twin are also printed. For a group number, only the group number lines are printed as device information. The order does not remain after system restart. 3   Examples 3.1   Example 1 FHDLP:DEV=FHC-0; The data link connection for device FHC-0 is printed. All the devices connected to this device by the semipermanent function are printed (twin and local devices, ISDN basic access devices, subscriber number, and link identification codes). 3.2   Example 2 FHDLP:SNB=43210000&&43210009; The data link connection for subscribers 4321000 to 43210009 is printed. All the devices connected to each subscriber are printed with the link identification codes. 4   Printouts 4.1   Check Printout Not relevant. 4.2   Procedure Printouts NOT ACCEPTED fault type fault type FUNCTION BUSY         The function busy is busy. FORMAT ERRORdetails         The command was incorrectly specified. UNREASONABLE VALUEdetails         The parameter was specified with an unreasonable value. FAULT CODE 1 INCORRECT TYPE OF DEVICE The specified device is not a frame handler device, or is a device not used by the command. FAULT CODE 7 THE DEVICE DOES NOT EXIST The specified device does not exist. FAULT CODE 9 THE SUBSCRIBER IS NOT CONNECTED TO THE FH FUNCTION details The subscriber is not connected to the Frame Handler function. FAULT CODE 10 THERE IS NO SEMIPERMANENT CONNECTION TOWARDS FHL DEVICE There is no semipermanent connection towards the FHL device for the specified FHC. 4.3   Answer Printouts FRAME HANDLER DATA LINK CONNECTION DETAILS 4.4   Result Printouts - 5   Logging Not relevant. 6   Command Category Group Recommended value 0 (H'0). 7   Command Receiving Block FHA 8   Glossary FHC Frame Handler Concentrator FHL Frame Handler Local SAE Size Alteration Event 9   References 10   Printout Descriptions FRAME HANDLER DATA LINK CONNECTION DETAILS 11   Application Information FHC