INSTALLATION GUIDE
—FOR USB DATA CABLE ON WINDOWS SYSTEMS
Important note: To avoid loss of data,do not remove the USB data cable from the PC or the phone during data trasfer,Removing the calbe during data transfer may cause unstable operation of the Windows,Operating System
Note: The phone does not have to be connected during installation.
Insert the CD into the CE-ROM drive,
DO NOT plug in the calbe to pc usb port. IT is very important !
Run CD: \0 usbdriver driver \ PL-2303 Driver Installer.exe
4. Select: Next.
Select: Finish.
Restart the computer.
Insert the USB cable into the USB port of the pc.
installation of USB calbe complete.
Open Device Manager
CHANGES COMMUNICATIONS PORT UNMBER
System Properties.
Click Driver Manager.
Click PORTS(COM&LPT)
Right click Prolific USB-to-Serical Comm Port
Click Properties.
Click Port Settings
Click Advanced
Changes Com Port Number.
Click OK. Finish.
Select: Next
Select: Finish
COM4 is a assumed com port
And you must set your pc software is com4
Set pc software is 115200bps
If you want to change com4 to comx please read follower: