■ WIDE COMMON-MODE (UP TO Vcc+) AND DIFFERENTIAL VOLTAGE RANGĘ
. LOWINPUTBIAS AND OFFSET CURRENT
> LOW NOISE en = 15nVA'Hz (typ)
> OUTPUTSHORT-CIRCUIT PROTECTION
. HIGH INPUT IMPEDANCE J-FET INPUT STAGE
■ LOW HARMONIO DISTORTION : 0.01% (typ)
■ INTERNAL FREOUENCY COMPENSATION . LATCH UP FREE OPERATION
. HIGH SLEWRATE : 16V/us (typ)
N
DIP8
(Plastic Package)
D
S08
(Plastic Micropackage)
The TL072, TL072A and TL072B are high speed J-FET input dual operational amplifiers incorporating well matched, high voltage J-FET and bipolartransis-torsin a monolithic integrated Circuit.
The devicesfeaturehigh siew rates, Iow input bias and offset current, and Iow offset voltage temperaturę coefficient.
1 - Output 1
2 * lnverting input 1
3 - Non-inverting input 1
4 * Vcc
5 - Non-inverting input 2
6 - lnverting input 2
7 * Output 2
8 - Vcc+
ABSOLUTE MAXIMUM RATINGS
Symbol |
Parameter |
Value |
Unit |
Vcc |
Supply Voltage - (notę 1) |
±18 |
V |
Vi |
Input Voltage - (notę 3) |
±15 |
V |
Vid |
Differential Input Voltage - (notę 2) |
±30 |
V |
Ptot |
Power Dissipation |
680 |
mW |
Output Short-circuit Duration - (notę 4) |
Infinite | ||
Topef |
Operating Free Air Temperaturę Rangę Tl_072C.AC.BC TL072I.AI.BI TL072M.AM.BM |
0 to 70 -40 to 105 -55 to 125 |
°C |
T stg |
Storage Temperaturę Rangę |
-65 to 150 |
°c |
Notes: 1. Ali voltage values, except differential voitage. are with respea to the zero reference levei (ground} of the supply voltages where the
zero reference level Is the midpont between Vccł and Vccf.
2. Differential vołtages are at the non-ira/erting input terminal with respect to the inverting input terminal.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 volts, whichever is less
4. The output may be shorted to ground or to either supply. Temperaturo and /or supply voltages must be limited to ensure that the disslpatlon rating is not exceeded.