roz mazda mx3

Mazda MX-3 (EC) 1,6 1995-99 Engine codę: B6-DOHC

Im porta nt notę

Replacement lnterval Guide

Check For Engine Damage

Repair Times - hrs

Speciai Tools

Special Precautions

Removal

Instailation

Installation

1.    Disconnect tensioner spring [11 ]. Check free length of tensioner spring is 59,2 mm.

2.    Fit tensioner spring.

3.    Ensure timing marks aligned [6] & [7].

4.    Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets.

5.    Slacken tensioner bolt [10]. Allow tensioner to operate. Lightly tighten bolt.

6.    Fit crankshaft pulley boss and crankshaft centre bolt [8] & [9].

7.    Tum crankshaft slowly 1 5/6 turns clockwise until crankshaft sprocket mark aligned with tension setting mark [12],

8.    Slacken tensioner bolt [10]. Allow tensioner to operate. Tighten bolt. Tightening torque: 38-51 Nm. NOTĘ: Belt tension must only be set at tension setting marks [12].

9.    Tum crankshaft slowly 2 1/6 turns clockwise. Ensure timing marks aligned [6] & [7].

10.    Apply a load of 10 kg to belt at^. Belt should deflect 9,0-11,5 mm.

11.    If not: Repeat tensioning procedurę.

12.    Hołd crankshaft sprocket. Use tool No.49-D011-102. Tighten crankshaft centre bolt [8]. Tightening torque: 157-166 Nm.

13.    Install components in reverse order of removal.

14.    Tighten crankshaft pulley bolts [1], Tightening torque: 12,5-17,0 Nm.