suziki rm12506

suziki rm12506



9-4 GEARSHIFTING


Remove the spring ®.

Remove the gearshift cam stopper


• Remove the gearshift return spring © by removing tl ring.

ItoŚlI 09900-06107: Snap ring pliers

INSPECTION

•    Inspect the gearshift shaft © for bends and damage.

•    Inspect the return spring (D for damage.

• Inspect the pawls (D, pins @ and springs (D for damage.




Wyszukiwarka

Podobne podstrony:
suziki rm12507 GEARSHIFTING 9-5 GEARSHIFTING 9-5 Align the pin groove ® with the pin © when install
suziki rm12505 GEARSHIFTING 9-3GEARSHIFT LINKAGEREMOVAL •    Drain transmission oil.
suziki rm12564 15-12 FRONT AND REAR BRAKES • Remove the brake lever adjuster return spring ©. • &nb
suziki rm12513 10-4 TRANSMISSION AND CRANKSHAFTCRANKCASE SEPARATION • Remove the engine sprocket sp
suziki rm12514 TRANSMISSION AND CRANKSHAFT 10-5 • Remove the driveshaft ass’y © and countershaft as
suziki rm12527 FUEL SYSTEM 11-5CLEANING After cleaning, reassemble theo Replace the removei A WARNI
suziki rm12529 FUEL SYSTEM 11-7REED VALVEREMOVAL •    Remove the carburetor. (d/“ 11
suziki rm12535 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. • Remove t
suziki rm12541 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION •    Remove the seat a
suziki rm12543 13-6 ELECTRICAL SYSTEM • Remove the nut with a special tool. (S) 09930-40113: Rotor
suziki rm12551 FRONT AND REAR WHEELS 14-7BEARING REPLACEMENT • Remove the dust seals with the speci
suziki rm12552 14-8 FRONT AND REAR WHEELSREAR SPROCKET REPLACEMENT • Remove the rear sprocket. NOTĘ
suziki rm12556 15-4 FRONT AND REAR BRAKES •    Remove the reservoir cap. •  &nb
suziki rm12557 FRONT AND REAR BRAKES 15-5BRAKE PADS REPLACEMENTFRONT BRAKE PADS • Remove the cap ©
suziki rm12574 FRONT FORK AND STEERING 16-7 • With the outer tubę compressed by hands, remove the s
suziki rm12576 FRONT FORK AND STEERING 16-9 • Remove the compression damper unit from the sub-tank.
suziki rm12594 17-4 REAR SUSPENSION •    Lifting up the swingarm, remove the rear sh
suziki rm12501 KICK STARTER 8-5 • Install the spring guide (D with the groove ® of the spring guide
suziki rm12515 10-6 TRANSMISSION AND CRANKSHAFT • Measure the gearshift fork thickness with a verni

więcej podobnych podstron