MR293R190'8 1
PREPARING THE WINDSCREEN AFERTUHE
92 657
Apply metal primer to the point3 where the frame ha3 been damaged back to the metal durlng the removal or cleaning operat iotis.
Do Dot pot any primer on the fila of ■astic re«alning on the fraae. If neceasary, adapt the appllcator uslng a pair of sclasors.
---------
The aperture pillar finishing seals might have been damaged when the windaoreen was removed.
REPLACING THE FINISHING SEAL
Move away trim (1) so as to free seal
(2).
Hołd the trim away so that the new seal can be stuck on the inner face of the frame edge.
REPITTING
See sectlon 50 - "GENERAL - Products".
Fit the two new wedges to the windscreen aperture.
Take the nozzle with a triangular eross-section frora the bonding kit and cut it as shown above so thafc a 11 mm wide bead can be extruded.
Wyszukiwarka
Podobne podstrony:
MR293R190 8 1 PREPARING THE WINDSCREEN AFERTUHE 92 657 Apply metal primer to the point3 where the fr
MR293R19058 1 Fit the new trim, centring it with reference to the corners. PREPARING THE SCREEN FRA
MR293R19067 1 Remove: - the hood striker plates, - the seal, Ap
MR293R190&7 1 BONDING THE WINDOWS (aee aection entitled " WINDOWS -Windscreen and rear aoreen&q
MR293R190?3 1 PREPARAT!ON AND PAISTING MKTHOD HO REPAIRS POSSIBLE Ali fittings to be painted in the
47267 MR293R190?3 1 PREPARAT!ON AND PAISTING MKTHOD HO REPAIRS POSSIBLE Ali fittings to be painted i
MR293R190?3 1 PREPARAT!ON AND PAISTING MKTHOD HO REPAIRS POSSIBLE Ali fittings to be painted in the
Suzuki RM250b 5-8 CLUTCHCLUTCH PLATĘ • Apply transmission oil to the drive plates
MR293R190?1 1 PREPARAT10N AND PAINTIHG METHOD - Degrease. - Rub
MR293R19055 1 Adjustinq the Front Latchns Adjusting the Aide Eccentrics Łiii^ Adjusting the Latch R
MR293R19095 1 Fit the tikirt in place on the front and rear elips. Mark and tram t.hr location of t
więcej podobnych podstron