FRONT FORK AND STEERING 16-13
FRONT FORK AND STEERING 16-13
♦ Apply fork oil to the O-rings and bushing on the compression damper unit.
♦ With the damper rod held immovab!e in fully extended posi-tion, gently install the compression damper unit to the sub-tank.
With the damper rod held in vertical position, slowly mpv.e the inner rod several strokes.
\
\
w \
• • \
i /
v-
\ .
*
* Clamp the bottom (fiat part) of the sub-tank with a vise. | ||
CAUTION |
n | |
Do not clamp the sub-tank too tight. |
_ - i | |
♦ Tighten the compression damper unit to the specified torque. |
r $ « | |
H Compression damper unit: 30 N m (3.0 kgf-m, 21.5 Ib-ft) | ||
WVł \ y m |
. **\ s-
\ \
* Tighten the locknut by hand completely.
♦ With the damper rod held in vertical position, compress the damper rod fully to discharge an excess of oil.
CAUTION
Protect the inner rod end with a rag when compress-ing the damper rod.
NOTĘ:
Set the compression damper setting to the softest.