neu 4

deck. Bending lines are marked by short lines ncar the parts. 213,214 Afterguns’ shield. Assemble according to Fig. 14 and glue on the after deck where marked by an arc-like linę.

215-218 Cranes. Roli strips 215 and glue them as rings. Glue disc 216 to each ring. Form boxes 217, 218 and join them together where marked with arrows. Glue the cranes on bases 215-216. The rig-ging may be added to the cranes according to Fig. 28. Glue the assembled cranes amidships (Fig. I).

219-224 Searchlights. Assemble according to Fig. 13. Fasten two searchlights on the side platforms of the forward deckhouse and two on the upper platform of the after deckhouse.

225-231,E Octuple 40 mm guns. Assemble according to Fig. 15. 232 Rangefindcr base. Bcnd the part along the short lines near the part and glue to the front wali of the compass platform.

233-237,F Double 20 mm guns. Assemble according to Fig. 16. Glue one gun on the second turret from the bow. Glue tw'o guns on side platforms of the forward superstructure and two on the Stern, behind the shield.

238,239,G 20 mm single guns. Assemble according to Fig. 17. Glue the assembled guns on the stand near the catapult.

240-243 Sweep floats. Assemble according to Fig. 18. Place the floats on the boats’ bases at the forward deckhouse according to Fig. 1.

244 Breakwater. Glue together both parts, bend and glue on the fore deck, in front of the First turret.

245-250 Capstans. Assemble according to Fig. 19 and 1.

251,252 Anchors. Glue them into the openings in the hawse-pipe on the port side and in the first one front the bow on the starboard.

253    Gangways. Glue according to Fig. 1, 6, 7 and 13.

254    Glue the parts in twos and glue them to the deck 30 edges, on both sides of the second turret (Fig. I).

255-265 Motor-row pinnace (Fig. 20). Assemble and glue on the deck of 102 mm guns, on the right of the deckhouse with motorbo-ats’ stands (Fig. 7).

266-277 Motorboats 35-ft (Fig. 21). Place one assembled boat on the deck of 102 mm guns, on the left of the deckhouse with motorboats’ stands and place two boats on the stands (Fig. 7).

278-289 Motorboat 25-ft (Fig. 22). Glue it on skid B, on the left of after funnel.

290-298 Dinghies (Fig. 23). Place one on the pinnace near the fore funnel, two - on skid B on the right of the after funnel.

299 Floats. Assemble according to Fig. 1 and place them according to Fig. 1.

300-306 Fore mast. Assemble according to Fig. 1, 24 and 25. In Fig. 1 the mast steps are marked by red circles.

307-313 After mast. Assemble according to Fig. 1, 26 and 27. Assemble the rigging out of thin threads according to the scheme in Fig. 28.

314 Radar antennas. Glue them in twos and glue on the tops of the masts.

S,T Flagstaff. Assemble them according to the templates, glue to the deck on the bow and steru and hang the flags.

JSC 94 - norweska platforma wiertnicza / Norwegian drilling platform Bredford Dolphin. skala 1:400