296
MANUAŁ STEERING GEAR AND LINKAGE — R22T
Diassembly (Cont'd)__Inspection_
1. Remove tie-rod inner socket.
• Be careful not to damage rack.
• Clamp only the rack teeth.
2. Remove pin from rack.
3. Set in neutral position and put matching mark
on gear housing. Remove pinion assembly.
Thoroughly examine rack gear. If rack gear is damaged, cracked or worn, replace.
PINION ASSEMBLY
1. Thoroughly examine pinion gear. If pinion gear is damaged, cracked or worn, replace.
2. Inspect bearings to see that they roli freely and are free from cracked, pitted, or worn bal Is, rollers and races. Replace if necessary.
TIE-ROD OUTER SOCKET AND INNER SOCKET
• Check bali joint for swinging force (Measured at * point).
Tie-rod outer bali joint:
2.26 - 68.65 N
(0.23-7 kg, 0.51 - 15.44 Ib)
Tie-rod inner bali joint:
1.18 - 60.80 N
(0.12 - 6.2 kg, 0.26 - 13.67 Ib)
Wyszukiwarka
Podobne podstrony:
MANUAŁ STEERING GEAR AND LINKAGE — R22T _Inspection (Cont d)_ • Check bali joint for rotatingMANUAŁ STEERING GEAR AND LINKAGE — R22T _Assembly and Adjustment (Cont d)_ _L____ _,_,_ i a ........MANUAŁ STEERING GEAR AND LINKAGE — R22T_Assembly and Adjustment (Cont d)_ 561 A 98 N (10 kg. 22 Ib)MANUAŁ STEERING GEAR AND LINKAGE — R22T n 26 • 36 12.7 - 3.7, 20 • 27) Retainer adjusting screw lockIMANUAŁ STEERING GEAR AND LINKAGE — R22T_Assembly and Adjustment (Cont d)_ Oil seal side 6. Install2 39 Systemy przekładni oraz połączeń mechanicznych (Gear and linkage systems) 2.40suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coaSERVICE DATA AND SPECIFICATIONS (S.D.S.) Tightening TorgueGeneral Specifications Steering gear89 18a1267453 Em /2WSPECT80N AND REPA2RPRIMARY DR!VE 1. Inspect: ‘Primary drive gear ieeth (J) oPrim89 TransAlp Manual Front Wheel Suspention Steering 7 FRONT WHEEL/SUSPENSION/STEERING Mount the fronSuzuki RM1257 16-10 FRONT FORK AND STEERING INNER TUBĘ AND OUTER TUBĘ ♦ Inspect łSuzuki RM2504 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coatSuzuki RM2500 FUEL SYSTEM 9-13 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION ♦ &nSuzuki RM2508 14-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake diFord Mondeo Service And Repair Manual Ford MondeoService and Repair ManuałJeremy Churchill and A K LRozrzad 7 ENGINE-’L’ SERIES 25. Insert locking pin LRT-12-141 through hole in FIP drive gear and intsuziki rm12558 15-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION • Measure the front and rear brake dwięcej podobnych podstron