38

38




©


ENGINE MAINTENANCE

.After Engine Warm-up (Cont'd).


Adjust idle speed by turning throttle adjusting screw.


TAS & SAS


Throttle adjusting screw


Adjust idle "CO"% by turning idle adjusting screw. Refer to NOTĘ for idle limiter cap.


Idle limiter cap

A Metal idle limiter cap has been adopted. so adjust idle adjusting screw with idle adjusting screwdriyer.


Idle adjusting screw SMA719A

Race engine (2,000 -times under no-load, idle speed.

3,000 rpm) 2 or 3 and run engine at

1

f

Check idle "CO'"*.

IDLE *'CO"%

M/T: 2.0±1.0

A/T: 2.0r1.0 (in "D" position)

N.G.

O.K.


SMA716A



Turn off engine and connect air injection hose to air pipę and connect throttle opener control valve hose to throttle opener control valve.

1

r

Start engine.

1

r

Race engine (2,000 - 3,000 rpm) 2 or 3 times under no-load and run engine at idle speed.

1

f

Check idle speed.

IDLE SPEED

M/T: 750±50 rpm A/T: 700i50 rpm

(in "D" position)

O.K.

N.G.


SMA716A


Adjust idle speed by turning throttle adjusting screw.


c


END


D




Wyszukiwarka

Podobne podstrony:
Maintenance proceduręENGINE MAINTENANCE After Engine Warm-up (Cont d) c START ) f Start
ENGINE MAINTENANCE__After Engine Warm-up_ ADJUSTING IDLE RPM, ADJUSTING IGNITION TIMING AND
89 TransAlp Manual General Specifications Service 3 MAINTENANCECYLINDER COMPRESSION Warm up the eng
TROUBLE-SHOOTING AND DIAGNOSESPressure Testing 2.    Warm up engine until engine oil
plakat 211x300 24 listopada 2011IMPREZA INTEGRACYJNA WARM UP 2011 S-MRT: 20:00   &nbs
plakat 24 listopada 2011IMPREZA INTEGRACYJNA WARM UP 2011 Klub InBlanco Ul. Jagiellońska 6
suzuki rm25024 19-18 SERVICE DATAHANDLEBAR SET-UP Quick adjuster When the movement is felt heavier,
ENGINE OVERHAUL— Inspection (Cont d)_ CRANKSHAFT RUNOUT Check crankshaft runout. CYLINDER BORĘ Using
ENGINE OVERHAUL_Inspection (Cont d)— PISTON TO CYLINDER WALL CLEARANCE 1. Measure piston
89 TransAlp Manual General Specifications Service 3 MAINTENANCE BRAKE PEDAŁ FREE PLAY NOTĘ__ • Adju
89 TransAlp Manual General Specifications Service 3 7 MAINTENANCE<f% ĄVALVE CLEARANCE NOTĘ • insp
89 TransAlp Manual General Specifications Service 3 9 MAINTENANCE MAINTENANCE n J) <4 "i «»C
98 d1524e8c34 ENGINE ASSEfl/IBLY AND ADJUSTMENTTRANSM1SSI0N (T) Main axle assembly (2 : Main axle (Ę

więcej podobnych podstron