79
ENGINE OVERHAUL
_Inspection (Cont'd)—
PISTON TO CYLINDER WALL CLEARANCE
1. Measure piston diameter.
Piston diameter "H":
Refer to S.D.S.
Measuring point "L":
9 mm (0.35 in)
2. Check that piston clearance is within the specification.
Piston clearance:
0.023 - 0.043 mm (0.0009 - 0.0017 in)
MEASURING PISTON-TO-CYLINDER CLEARANCE
When pulling feeler gauge straight upward, measure the extracting force.
Feeler gauge thickness:
0.04 mm (0.0016 in)
Extracting force:
4.9 - 14.7 N (0.5 - 1.5 kg, 1.1 - 3.3 Ib)
SEM55C
Flywheel Runout-
about 180 to 220°C (356 to 428° F).
’ - . -
Wyszukiwarka
Podobne podstrony:
ENGINE OVERHAUL— Inspection (Cont d)_ CRANKSHAFT RUNOUT Check crankshaft runout. CYLINDER BORĘ Using
ENGINE OVERHAUL Inspection.Disassembly 3. Remove crankshaft. PISTON 1. Place engine on work
ENGINE OVERHAULInspection (Cont d) PISTON RING GAP CRANKSHAFT INSPECTION 0.8(0.031) / Ring gap mm
ENGINE OVERHAUL.Cylinder Błock, Crankshaft and Piston (3.0 - 3.5, 22 - 25) :i a IR 46.52 (4.7 - 5.3,
ENGINE OVERHAULAssembly (Cont d) 2. Select suitable thickness of main bearing according to the follo
Suzuki RM125? 6-8 CYLINDER, PISTON AND EXHAU$T VALVE 6-8 CYLINDER, PISTON AND EXHAU$T VALVE PISTON-T
CYLINDER HEAD InspectionDisassembly (Cont d) 6. Remove va!ve component parts. 4.
ENGINE OVERHAULAssembly_ PISTON Main bearing selection a. Numbers are stamped on t
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
Suzuki RM250 8 19-2 SERVICE DATASERVICE DATACYLINDER + PISTON + PISTON RING ITEM STD/SPEC. LIMIT
00423 667fecfd0297018410f68913aeb4083 427 Process Capability: Engineering and Statistical Issues ba
How far can you go in electronics... Two years ago, Field Engineer William G. Miles was asked to out
IMG&51 Briefing on special events 1. Tlicre was an engine alann al... UTC due to .
F00574 020 g003 o EXAMINATION OF THE THYROID GLAND • Inspect from front to side •
MSc IN MECHANICAL ENGINEERING specialization: International Design Engir to beobtained Master of
Comparison of Liąuid Propellant Rocket Engine Feed Systems - 1 - 11 According to the previously expo
więcej podobnych podstron