48 064b51f480

INSP

ADJ

AUTOLUBE PUMP STROKE ADJUSTMENT/ AUTOLUBE PUMP AIR BLEEDING

•Install the adjusting piąte, spring washer and locknut.

Locknut:

7 Nm (0.7 m»kg, 5.1 ft*!b)

•Recheck the minimum pump stroke. If out of specification, perform the above steps again.

7. Install:

©Autolube pump cover •Lower cowling

AUTOLUBE PUMP AIR BLEEDING NOTĘ: _____■__

The Autolube pump and delivery lines must be bied on the following occasions:

•Setting up a new motorcycle out of the crate. ®Whenever the oil tank has run dry. •Whenever any portion of the engine oil system is disconnected.

1.    Remove:

©Lower cowling

Refer to "COWLINGS" section.

2.    Remove:

©Autolube pump cover (T)

3.    Air bleed:

©Pump case and/or oil pipę

Air bleeding steps:

•Remove the bleed screw (T).

©Keep the oil running out until air bubbles dis-appear.

•When air bubbles are expelled completely, tighten the bleed screw.

NOTĘ: _

Check the bleed screw gasket and if damaged, replace with a new one.

3-8