61 401e331105

INSP	WSI
ADJ

DRIVE CHAIIM SLACK ADJUSTMENT/DRIVE CHAIN LUBRICATION/STEERING HEAD ADJUSTMENT

•Tighten the nut {Rear wheei axle)

K

Nut (Rear Wheel Axle):

60 Nm (6.0 m*kg, 44 ft*lb>

•Insert a new cotter pin.

WARNING:

Always use a new cotter pin.

•Bend the end of cotter pin as shown. •Adjust the free play in the brake pedał.

DRIVE CHAIN LUBRICAT80N

The chain consists of many parts which work against each other. if the chain is not maintained properly, it will wear out rapidly, therefore, form the habit of periodically servicing the chain. This service is especiatly necessary when riding in dusty conditions.

1.    Use any brand of spray type chain lubricant. First, remove all dirt and mud from the chain with a brush or cloth, then spray a lubricant between both rows of side plates and on all center rollers.

2.    To clean the chain, remove the chain from the machinę, dip it in solvent, and clean out as much dirt as possible. Take the chain out of the solvent and dry it. Immediately lubricate the chain to prevent rust.

STEERING HEAO ADJUSTMENT

Securely support the motorcycle so there is no danger of it falling over.

1.    Remove:

•Lower cowling

Refer to "COWLINGS" section.

2.    Elevate the front wheel by placing a suitable stand under the engine.