60 468dc5e46b

DRIVE CHAIN SLACK ADJUSTMENT

1NSP

APJ

DRIVE CHAIN SLACK ADJUSTMENT NOTĘ: __-    ■■    -

Before checking and/or adjusting, rotate the rear wheel through several revolutions and check slack at several points to find the tightest point. Check and/or adjust the chain slack wrth the rear wheel in this "tightest" position.

1. Check:

®Drive chain slack @

Out of specification-*Adjust.

Drive Chain Slack:

25-30 mm (1.0—1.2 in)

2. Adjust:

°Drive chain slack

Adjustment steps:

__________

Too smali chain slack will overload the en-gine and other vital parts; keep the slack withan the specified limits.

®Remove the cotter pin (T).

©Loosen the nut (Rear wheel axle)

•Turn the adjusters (J) in or out until specific slack is obtained

Increase slack	Turn out the adjusters and push the rear wheel forward.
Decrease slack	Turn in the adjusters.

NOTĘ:

Turn each adjuster exactly the same amount to maintain correct axle alignment. (There are marks @ on each side of swingarm and on each chain puller; use them to check for proper alignment.)

-----

3-20