Suzuki RM2503

PERIODIC MAINTENANCE 2-17

PERIODIC MAINTENANCE 2-17

N \\ 4 \ V >

20TH PITCH LENGTH

Puli the drive Chain tight and measure the 20th pitch length.

EGfflI Dr\ve Chain 20th pitch length

Service limit: 323.8 mm (12.75 in)

DRIVE CHAIN LUBRICATION

* Remove the Chain clip and master link from the drive Chain and remove the drive Chain.

NOTĘ:

Be careful not to bend the Chain clip.

Inspect for wear and damage ot the drive Chain and replace it if necessary.

Clean the drive Chain with non-flammable cleaning solyent. \ Do not use gasoline to clean the drive chairr. \\ J \ Dry the drive Chain.    /y \\. \\ \

Apply Suzuki Chain Lube or an equiVatentta the link plates and rollers.    \

1 23    192021

♦    Reassemble the drive Chain.

NOTĘ:

Reassemble the drive Chain clip so the slit end faces opposite the direction ot rotation.

•    Adjust the drive Chain slack. (CU“2-16)

SPROCKET INSPECTION

Inspect the engine sprocket and rear sprocket for wear and cracks. Replace the sprockets as necessary.

NOTĘ:

When replacing a worn sprocket, it is likely that the drive Chain will need to be replaced as well.