65 56e95422d8

65 56e95422d8



INSP

■C3

ADJ

mtm


CABLE INSPECTION AND LUBRICATION/LEVER AND PEDAŁ LUBRICATION/SIDESTAND LUBRICATION

2. Check:

• Cable operation Unsmooth operation-* Lubricate.

Recommended Lubricant:

Yamaha Chain and Cable Lube or SAE 10W30 Motor Oil


NOTĘ:

Hołd cable end high and apply several drops of lubricant to cable.

LEVER AND PEDAŁ LUBRICATION

Lubricate pivoting parts of each lever and pedał.

Recommended Lubricant:

Yamaha Chain and Cable Lube or SAE 10W30 Motor Oil


SIDESTAND LUBRICATION

Lubricate the sidestand at pivot points.

3-25


Recommended Lubricant:

Yamaha Chain and Cable Lube or SAE 10W30 Motor Oil



Wyszukiwarka

Podobne podstrony:
67 26a2826d2f INSP 0K2 ADJ cm BATTERY INSPECTION Replace the battery if: •Battery voltage will not
64 85e53cc738 INSP ADJ WHEEL INSPECTION/CABLE INSPECTION ANDLUBRICATION WHEEL INSPECTION 1.
63 e2565523a0 TIRE INSPECTION INSP ADJ Pi i TIRE INSPECTION WARNING: Do not attempt to use tube
41 776fe880e4 INSP ADJ mrm INTRODUCTION/PERIODIC MAINTENANCE/ LUBRICATION INTERVALSPERIODIC INSPE
61 401e331105 INSP WSI ADJ DRIVE CHAIIM SLACK ADJUSTMENT/DRIVE CHAIN LUBRICATION/STEERING HEAD
42 f1cababa87 INSP psa ADJ INTRODUCTIOIM/PERIODIC MAINTEIMAINICE/ LUBRICATIOW IIMTERVALS NOTĘ: - B
The Knitters Bible2 CABLE STITCHES Circle Cable Ripple and Rock Braid Cable Abbrcviations: CMI. - s
17368 MR293R19064 1 eto.) are supplied in the kit. 4) BOUTING OF THE SIREN CABLE {pbotos 6, 7> S
46705 Suzuki RM250 PERIODIC MAINTENANCE 2-9TRANSMISSION OIL TRANSMISSION OIL LEVEL INSPECTION 
7 94078f0582 CHAPTER 3.PERIODIC INSPECTION AND
c3 Practice People are drinkingPresent and past trends Read the examples. a lot less sake. less
PUSZKI HERMETYCZNE, DŁAWIKI I ZŁĄCZKICABLE JUNCTI ON ENCLOSURES, CABLE GLANDS AND CONNECTORS Cecha l
I PUSZKI HERMETYCZNE, DŁAWIKI I ZŁĄCZKI CABLE JUNCTION ENCLOSURES, CABLE GLANDS AND CONNECTORS ► Pus
83 6f6936accc INSPECTION AND REPAIRENG m 4-13 Warpage measurement and resurface-ment steps: •Attach
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)VALVE Unit: mm (in)Valve s
85 ec002ba75d INSPECTION AND REPAIRENG § Piston size P Standard 39.96 - 39.98 mm (1.573-1.574

więcej podobnych podstron