85 ec002ba75d

85 ec002ba75d



INSPECTION AND REPAIR


ENG


\



§

Piston size P

Standard

39.96 - 39.98 mm (1.573-1.574 in)

Oversize 1

40.25 mm (1.58 in)

Oversize 2

40.50 mm (1.59 in)

•If out of specification, replace piston and piston rings as a set.

Third Step:

•Calculate the piston-to-cylinder clearance with following formula:

Piston-to-cylinder Clearance = Cylinder Borę "C"-Piston Skirt Diameter "P"

• If out of specification, rebore or replace cylinder, and replace piston and piston rings as a set.

Piston-to-cylinder Clearance: 0.030-0.035 mm (0.0012 — 0.0014 in)

Limit: 0.1 mm (0.004 in)



PISTON RINGS

1. Measure:

• Side clearance

Out of specification-* Replace piston and/or rings.

Use a Feeler Gauge ®.

Side

Clearance

Top

0.03-0.05 mm (0.001-0.002 in)

2nd

0.03 - 0.05 mm (0.001-0.002 in)

4-15



Wyszukiwarka

Podobne podstrony:
87 1160047f2c INSPECTIOIM AND REPAIR 5.    Check: • Free play (when the piston pin is
83 6f6936accc INSPECTION AND REPAIRENG m 4-13 Warpage measurement and resurface-ment steps: •Attach
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
86 4c6f346dff INSPECTION AND REPAIRENG m 0.15-0.35 mm (0.006 - 0.014 in) 2.    Instal
88 1a78f80731 INSPECTION AND REPAIRENG m Clutch Spring Minimum Length: 26.2 mm (1.03 in) 6. Measure:
92 eaef762dcf INSPECTION AND REPAIRENG
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
img036 (25) NAOMI GRIFFIN lives in New York City with her husband and dog. Finished Size 40 4 (45, 4
Suzuki RM250 9 14 GENERAL INFORMATION A WARNING *    Proper semce and repair procedur
Ford Mondeo Service And Repair Manual Ford MondeoService and Repair ManuałJeremy Churchill and A K L
T elemobisieBrandmg and identity2013 CHALLENGE Market of Stores selling and repairing phones is fill
(I www.mtuexam.blogspot.in Cl KCV + (ii) A materiał is crushed in Jaw crusher and the average size o
46705 Suzuki RM250 PERIODIC MAINTENANCE 2-9TRANSMISSION OIL TRANSMISSION OIL LEVEL INSPECTION 
65 56e95422d8 INSP ■C3 ADJ mtm CABLE INSPECTION AND LUBRICATION/LEVER AND PEDAŁ LUBRICATION/SIDESTA
7 94078f0582 CHAPTER 3.PERIODIC INSPECTION AND
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)VALVE Unit: mm (in)Valve s
Valve seatSERVICE DATA AND SPECIFICATIONS (S.D.S.)_Inspection and Adjustment (Cont d)_ INTAKE 1.5
85 (69) Cascade Yarn: D.M.C. No. 30 Size: 18-5 cm. (7£ in.)    - /J Abbreviations: Nu

więcej podobnych podstron