92 eaef762dcf

92 eaef762dcf



INSPECTION AND REPAIR


ENG | \B

4. Inspect:

• Crankshaft bearing Pitting/Damage-1 2 Replace.

NOTĘ: _

Lubricate the bearings immediately after examin-ing them to prevent rust.

1

5. Inspect:

•Oil seals

Wear/Damage-2 Replace.

CRANKCASE

1.    Thoroughly wash the case halves in mild solvent.

2.    Clean all the gasket mating surfaces and crankcase mating surfaces thoroughly.

3.    Inspect:

2

   Crankcase

Cracks/ Damage -> Replace.

•Oil dellvery passages Clog-2Blow out with compressed air.

AUTOLUBE PUMP

Wear or an internal malfunction may cause pump output to vary from the factory setting. This sit-uation is, however, extremely rare. If improper output is suspected, inspect the following:

1.    Inspect:

•Delivery linę

Obstructions-^BIow out.

•Pump body seal/Crankcase cover seal Wear/ Damage -2■ Replace.

•Check ball/Spring Miss/ Improper-^ Repair.

2.    Inspect:

•    Allowing air

Air exists 2Air bleed.

4-22


Wyszukiwarka

Podobne podstrony:
suziki rm12505 REAR SUSPENSION 17-15 • Inspect the bearings, spacers and oil seals for damage. • In
suzuki rm25092 REAR SUSPENSION 16-19 •    Inspect the bearings, spacers and dust sea
83 6f6936accc INSPECTION AND REPAIRENG m 4-13 Warpage measurement and resurface-ment steps: •Attach
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
85 ec002ba75d INSPECTION AND REPAIRENG § Piston size P Standard 39.96 - 39.98 mm (1.573-1.574
86 4c6f346dff INSPECTION AND REPAIRENG m 0.15-0.35 mm (0.006 - 0.014 in) 2.    Instal
87 1160047f2c INSPECTIOIM AND REPAIR 5.    Check: • Free play (when the piston pin is
88 1a78f80731 INSPECTION AND REPAIRENG m Clutch Spring Minimum Length: 26.2 mm (1.03 in) 6. Measure:
19971 Suzuki RM125 5 REAR SUSPENSION 17-15 ♦ Inspect the bearings, spacers and oil seals for damage.
38926 Suzuki RM2502 REAR SUSPENSION 16-19 ♦    Inspect the bearings, spacers and dus
FRONT AXLE — Wheel Hub and Knuckle -Inspection_ WHEEL BEARING Make surę wheel bearing roiIs freely a
suziki rm12535 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. • Remove t
69818 Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6
Suzuki RM1255 12-6 COOLING SYSTEM • Inspect the bearing for smooth inner race movement. 12-6 COOLIN
Suzuki RM250 9 14 GENERAL INFORMATION A WARNING *    Proper semce and repair procedur
4id928 HOTHER’S LOVH ida 11 Uda 14 Uda 18 lardanger 22 Notę: For Cross Stitches in e
Ford Mondeo Service And Repair Manual Ford MondeoService and Repair ManuałJeremy Churchill and A K L

więcej podobnych podstron