86 4c6f346dff

86 4c6f346dff



INSPECTION AND REPAIR


ENG


m



0.15-0.35 mm (0.006 - 0.014 in)



2.    Install:

•Piston ring

Into the cylinder.

Push the ring with the piston crown.

3.    Measure:

•End gap

Out of specification->Replace rings as a set. Use a Feeler Gauge.

0.15-0.35 mm (0.006-0.014 in)

Oversize Piston Ring

Oversize 1

25

Oversize 2

50

PISTON PIN AND BEARING

1.    Lubricate:

•Piston pin (Lightly)

2.    Install:

• Smali end bearing •Piston pin

Into the smali end of connecting rod.

3.    Check:

•Free play

There should be no noticeable free play. Free play exists - Inspect the connecting rod for wear/Replace the pin and/or connecting rod as required.

4.    Install:

•Piston pin

Into the piston pin hole.

4-16


Wyszukiwarka

Podobne podstrony:
85 ec002ba75d INSPECTION AND REPAIRENG § Piston size P Standard 39.96 - 39.98 mm (1.573-1.574
88 1a78f80731 INSPECTION AND REPAIRENG m Clutch Spring Minimum Length: 26.2 mm (1.03 in) 6. Measure:
83 6f6936accc INSPECTION AND REPAIRENG m 4-13 Warpage measurement and resurface-ment steps: •Attach
84 5c90f6ee81 INSPECTIOIM AND REPAIR 5. Measure: •Piston-to-cylinder clearance Pisto
87 1160047f2c INSPECTIOIM AND REPAIR 5.    Check: • Free play (when the piston pin is
92 eaef762dcf INSPECTION AND REPAIRENG
21595 skanowanie0014 (61) Zdjęcia mikroskopowe oocyst i jaj pasożytów (15-35 x 10-24 Mm, pow. 400x)
dodawanie i odejmowanie do0 POMALUJ WEDŁUG KODU 0 czerwony: 15, 35, 68 # pomarańczowy’: 7, 27, 62
suzuki rm25063 FRONT FORK AND STEERING 15-17 INNER TUBĘ AND OUTER TUBĘ •    Inspect
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)VALVE Unit: mm (in)Valve s
SERVICE DATA AND SPECIFICATIONS (S.D.S.)Inspection and Adjustment (Cont d)Piston ring Unit: mm (in)C
26502 Suzuki RM2507 FRONT FORK AND STEERING 15-21 FRONT FORK AND STEERING 15-21 Approx.10 mm (0.39
64653 Suzuki RM250 6 19-20 SER VICE DATASPECIFICATIONSDIMENSIONS AND DRY MASS 2 175 mm (86.5 in) 840
choroszy 1 221 wów mieszczą się w przedziale od 0,15 do 0,35 mm/obr, podczas gdy dla rE = 0,8 mm i =

więcej podobnych podstron