89 TransAlp Manual Cylinder Piston 1
10. CYLINDER/PISTON
|
SERN/ICE INFORMATION |
10-1 |
PISTON RING INSTALLATION |
10-5 |
|
TROUBLESHOOTING |
10-1 |
PISTON INSTALLATION |
10-5 |
|
CYLINDER REMOVAL |
10 2 |
CYLINDER INSTALLATION |
10-6 |
|
PISTON REMOVAL |
10-3 |
SERVICE INFORMATION
GENERAL
• This section covers service of the cylinder and piston. These procedures can only be performed with the engine removed from the frame.
SPECIFICATIONS
mm <in|
TROUBLESHOOTING
Low or uneven compression
• Worn cylinder or piston rings.
• Leaking head gasket.
• Incorrect valve timing.
Piston noise
• Worn cylinder and piston.
• Excessive carbon deposits.
Excessive smoke
• Worn cylinder and piston rings.
• Improperly installed piston rings.
• Damaged piston or cylinder.
Overheating
• Excessive carbon deposits on piston or combustion chamber.
• Faulty water pump.
10-1
Wyszukiwarka
Podobne podstrony:
89 TransAlp Manual Crankshaft Transmission 1 11. CRANKSHAFT/TRANSMISSION SERN/ICE INFORMATION
89 TransAlp Manual Hydraulic Brake 1 15. HYDRAULIC BRAKE SERN/ICE INFORMATION 15-1 BRAKE
89 TransAlp Manual Ignition System 1 17. IGNITION SYSTEM SERN/ICE INFORMATION 17-1 PULSE
89 TransAlp Manual Cylinder Piston 3 CYLINDER/PłSTON CYLINDER/PłSTON SERYICE LIMIT: 0.10 mm (0.004
89 TransAlp Manual Cylinder Piston 2 CYLINDER/PISTONCYLINDER REM0VAL Remove the cylinder heads (Ref
89 TransAlp Manual Cylinder Piston 4 CYLINDER/PISTON Measure the piston ring-to-groove clearance. S
89 TransAlp Manual Cylinder Piston 5 CYLINDER/PISTONPISTON RING INSTALLATION Clean the piston domes
89 TransAlp Manual Cylinder Piston 6 CYLINDER/PISTONCYLINDER INSTALLATION Install the dowel pins an
89 TransAlp Manual Cylinder Head Valve 9 0 CYLINDER HEAD/VALVE 10 N-m (1.0 kg-m. 7 ft-łbl 10 N-m (1.
89 TransAlp Manual Cylinder Head Valve 9 2 CYLINDER HEAD/VALVETOROUE VALUES Cylinder head cover mo
89 TransAlp Manual Cylinder Head Valve 9 1 9. CYLINDER HEAD/VALVE SERVICE INFORMATION 9-1 CYLINDER
89 TransAlp Manual Cylinder Head Valve 9 Valve guide reamer JCYLINDER HEAD/VALVE Measure and record
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE TOOLS: Valve guide drłver IN: &n
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Remove and inspect each valve.CAUTION
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Use a 60 degree cutter to remove the b
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Refinish the seat to the specification
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE CYLINDER HEAD/VALVE 5 Tapthe valve ste
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Check the oil pass pipę bolts and oil
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE NOTĘ • If both the f
więcej podobnych podstron