89 TransAlp Manual Cylinder Head Valve 9
CYLINDER HEAD/VALVE
Remove and inspect each valve.
CAUTION
• The valve cannot be ground. If the valveface is burned or badly worn or if il contacts the seat unevenly, replace the valve.
Inspect the width of each valve seat as shown.
STANDARD: 0.9-1.1 mm (0.035-0.043 łn)
SERVICE LIMIT: 1.5 mm (0.06 In)
If the seat is too wide, too narrow or has Iow spots, the seat must be ground.
VALVE SEAT CUTTERS
Honda Valve Seat Cutters, grinder or equivalent valve seat refacing eąuipment are recommended to correct a worn valve seat.
NOTĘ
• Follow the refacer manufacturer's operating instructions.
VALVE SEAT REFACING
Use a 45 degree cutter to remove any roughness or irregulari-ties from the seat.
NOTĘ
• Reface the seat with a 45 degree cutter when a valve guide is replaced.
Use a 32 degree cutter to remove the top 1/4 of the existing valve seat materiał.
9-12
(1i ROUGHNESS/IRREGULARITIES
Wyszukiwarka
Podobne podstrony:
89 TransAlp Manual Cylinder Head Valve 9 Valve guide reamer JCYLINDER HEAD/VALVE Measure and record
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE TOOLS: Valve guide drłver IN: &n
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Use a 60 degree cutter to remove the b
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Refinish the seat to the specification
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE CYLINDER HEAD/VALVE 5 Tapthe valve ste
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Check the oil pass pipę bolts and oil
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE NOTĘ • If both the f
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVEREAR CYLINDER NOTĘ • If the front cylin
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE CYLINDER HEAD/VALVE ► Install the hold
89 TransAlp Manual Cylinder Head Valve 9 0 CYLINDER HEAD/VALVE 10 N-m (1.0 kg-m. 7 ft-łbl 10 N-m (1.
89 TransAlp Manual Cylinder Head Valve 9 1 9. CYLINDER HEAD/VALVE SERVICE INFORMATION 9-1 CYLINDER
89 TransAlp Manual Cylinder Head Valve 9 2 CYLINDER HEAD/VALVETOROUE VALUES Cylinder head cover mo
89 TransAlp Manual Cylinder Head Valve 9 CYLINDER HEAD/VALVE Install the frame bridge and tighten t
89 TransAlp Manual Cylinder Head Valve 9 3 CYLINDER HEAD/VALVECYLINDER HEAD COVER REMOVAL Drain the
89 TransAlp Manual Cylinder Head Valve 9 4 CYLINDER HEAD/VALVECAM CHAIN INSPECTION Measure the heigh
89 TransAlp Manual Cylinder Head Valve 9 5 CYLINDER HEAD/VALVE CYLINDER HEAD/VALVE i Puli the cam ch
89 TransAlp Manual Cylinder Head Valve 9 6 CYLINDER HEAD/VALVE Camshaft runout Support both ends of
89 TransAlp Manual Cylinder Head Valve 9 8 CYLINDER HEAD/VALVECYLINDER HEAD REMOVAL Remove the engin
89 TransAlp Manual Cylinder Head Valve 9 9 CYLINDER HEAD/VALVEDISASSEMBLY/INSPECTION Remove the valv
więcej podobnych podstron