Cin Acr 850 [FMI] M814 87


{Change Comments ***********************************************************}

{12/17/92,
Copied & modified: Cin Acr 850MC (VTF) M328.81.2
For: FN Manufacturing
Machine: Cincinnati Milacron
Control: Acramatic 850MC
Changes made per sample program and manual supplied by Mike Giugliano at FN Manufacturing.
Changed FORMATs for G & M codes from '00' to '#0' in Mach Spec.
Moved PostScript Indexing to GetIndex sub for output on StrtPos line at FirstOperation, NewTool
and SameTool.
Added CRCOffC LastFeatExtend at end of ToolPath.
Deleted all other non-AutoCycle occurances of CRCOffC.
Added Rapid to OpToolID ToolChng at FirstOperation and NewTool.
Moved all WFOStuff calls to StrtPos line at FirstOperation, NewTool and SameTool.
Moved Plane to StrtPos line at FirstOperation, NewTool and SameTool.
Moved Speed CheckSpinOn to StrtPos line at FirstOperation, NewTool and SameTool.
Added PreTool at FirstOperation and NewTool.
Added ToolOfst to ZCP1 at FirstOperation, NewTool and SameTool.
Added literal 'G98Z25.H0D0' for OfstOff at NewTool, SameTool and end of Prog.
Added literal 'M54', Parts Washer On code, at FirstOperation.
Added literal 'M53', Parts Washer Off code, at end of Prog.
Added literal 'M52', Unload Last Tool code, at end of Prog.
DWB}

{8/20/93
Copied & modified: Cin Acr 850MC (FN) M541.81.2
For: Braden Engineering / Westt, Inc.
Machine: Cincinnati
Control: Acramatic 850 SX
Modified drilling cycles
Changed RLevel to RLevelCin
Changed ZDepth to math calculation for Z value
Added DrillOff line with ZCP3
Jim Radcliffe}

{1/26/94
Modified: Cin Acr 850SX [WI] M598.81.2
For: Gibbs & Associates / Creative Image
Versions: ncCad 4.32/ncCam 4.32/ncPost 4.32.2/Compost4.21.19
Changes made per Dale Weber at Creative Image.
Added CkCRC sub for CRCOffC per version 4.2.
CutterRadiusCompensation ExitLength will output G40 on LastFeat AND LineFeat at StdLine sub.
DWB}

{2/16/94
Modified: Cin Acr 850SX [WI] M598.81.3
For: Gibbs & Associates / Creative Image
Versions: ncCad 4.32/ncCam 4.32/ncPost 4.32.02/Compost 4.21.19
Changes made per Dale Weber at Creative Image.
Added HelixPitch# and FORMAT #8 for Helical Arcs.
Forcing ArcEndPoints and ArcCenterPoints at FormatArc sub.
Added testing to route ToolPath ArcFeat through StdLine for some single axis moves.
Added ckMove sub to test for single axis moves.
Added ckHMove sub to test for Horizontally Mirrored Arc EndPoint.
Added ckVMove sub to test for Vertically Mirrored Arc EndPoint.
Added Flag(1) to route ArcFeat through StdLine when TRUE.
DWB}

{9/13/94
Modified: Cin Acr 850SX [WI] M598.81.4
For: Gibbs & Associates / Cincinatti Milacron
Versions: ncCad 4.33/ncCAM 4.33/ncPost 4.33.03/Compost 4.21.22
Updated to Version 4.2 per Fanuc 6M M001.81.2e Format.
Added support of CRC during multiple pocket dog-bone operation.
Added condition to output CRCOnC for XMove OR YMove only at CkCRC sub.
Outputs G41/G42 on First LineFeat after Z Plunge.
Modified condition to output CRCOffC for LastFeat AND AutoCycle at ToolPath RapidFeat.
Assures that G40 is not output prior to LastFeat.
Added CRCOffC to RapidFeat at ToolPath.
Outputs CRCOffC for ZMoveOnly Feature at ToolPath RapidFeat.
Corrected problem with PostScript 4th and 5th axis indexing.
Output is supposed to appear within StrtPos block of all Operations.
Deleted SeqLabC and EOL at GetIndex sub.
EOL was causing commands following GetIndex to be output on new line without a SeqLab output.
Added call to GetIndex sub at DoEndOpPS sub.
We were only checking at start of Operations.
Any ENDOP indexing was output on StrtPos block of NextOp.
Any Indexing input in NewOp caused NewIndex to be output on new line with a SeqLab output.
Balance of StrtPos block was then output on new line without a SeqLab output.
Changed condition of outputting literal 'G89' or Cycle at IF Drilling.
Was IF Dwell? AND NOT FIRO? AND NOT Tap?
Changed to IF FIFO? AND Dwell?
Virtual allows Dwell for Peck Cycles and this was easier than adding AND NOT Peck?
DWB}

{7/6/95
Initial: Cin Acr 850SX [WI] M598.81.5
ForUser: Murtaugh / FM Industries
Control: Cinci Acr 850
Machine: Cinci
Comment: New processor per marked up readout and conversation with Alex Hoffmann
Deleted Program ID.
Deleted sequence number from tool change line, outputting colon only.
Added G codes to saftey start block at beginning of program.
Deleted 'M54' and 'M53' codes.
Deleted PreTool.
Changed CheckSpinOn to SpinOn, deleted CheckSpinOn sub.
Added CoolOn to ZCP1 line.
Deleted ToolOfst, the T code calls tool, length comp and diameter comp.
Added CoolOff.
Deleted 'G98Z25.H0D0' at tool changes, M6 causes move to tool change position.
Added 'M26' for full retract where needed.
Deleted SpinOff.
Added 'G98X20.Y20.H0' to end of program.
Added 'J2' to call Rigid Tap and 'J0' to cancel.
Jim Radcliffe}

{2/9/96, Updated .81 version to .84, MPK}

{3/22/96, Tested ZOnlyRepAutCycle, Incremented number to .87, MPK}

{Prog Numeric Format Definitions *******************************************}

#1 = '#.00'
#2 = '###.###;0.'
#3 = '*###.###;0.'
#4 = '####.####;0'
#5 = '#######0'
#6 = '##.##;0.'
#7 = '0000'
#8 = '+####.####;0'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CP1LessCP2#,4)
FORMAT(ADD#,4)
FORMAT(ToolDiameter#,4) {.72}
FORMAT(Repeats#,5)
FORMAT(Tag#,5)
FORMAT(Operation#,5) {.72}
FORMAT(Tool#,5) {.72}
FORMAT(NewWFO#,5) {.72}
FORMAT(Parts#,5) {.72}
FORMAT(Dwell#,6) {.72}
FORMAT(Program#,7) {.72}
FORMAT(HelixPitch#,8)

{Prog Subroutines **********************************************************}

RestoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

DoSubComment:
IF UseComments? AND SubComment?
'(MSG, SUB NUMBER: ' Tag# ' )' EOL
END
RETURN

DoOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'(MSG, OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'(MSG, ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'(MSG, ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'(MSG, TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'(MSG, ' ToolComment$ ' )' EOL
END
RestoreScale
END
RETURN

PSInit: {reset flags}
NewWFOF
RotateF
RETURN

PSStuff: {revised.72}
RETURN

GetIndex:
IF FourthCW?
FORMAT(FourthDegree#,2)
'A' FourthDegree#
FourthCWF {reset flag}
END
IF FourthCCW?
FORMAT(FourthDegree#,3)
'A' FourthDegree#
FourthCCWF {reset flag}
END
IF FifthCW?
FORMAT(FifthDegree#,2)
'B' FifthDegree#
FifthCWF {reset flag}
END
IF FifthCCW?
FORMAT(FifthDegree#,3)
'B' FifthDegree#
FifthCCWF {reset flag}
END
RETURN

DoPostScript:
PSInit
EachPS
SeqLabC PostScript EOL {literals}
PSStuff {commands}
NextPS
RETURN

DoEndOpPS:
PSInit
EachEOPS
SeqLabC EndOpPS EOL {literals}
PSStuff {commands}
SeqLabC GetIndex EOL
NextPS
RETURN

EntryMove:
IF FeedEntry?
SeqLabC Feed ZIn FeedEnt EOL
ELSE
SeqLabC RapidC ZIn EOL
END
RETURN

StartSub:
OpenSub
'(DFS,L' Tag# ')' EOL
DoSubComment
RETURN

SubWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'(MSG, WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN

StdSub:
SeqLabC 'G10=[T2]V0' EOL {sets temporary register #2 to 0}
SeqLabC 'Q' Tag# '1' EOL {branch label 1}
SeqLabC '(CLS,L' Tag# ')' EOL {call subroutine}
SeqLabC 'G10=[T2]V[T2]+1' EOL {increment register #2 by 1}
SeqLabC 'G11E[T2]=' Repeats# 'L' Tag# '2' EOL {if register #2 is equal to number of repeats then jump to branch label 2}
SeqLabC 'G11L-' Tag# '1' EOL {jump backwards to branch label 1}
SeqLabC 'Q' Tag# '2' EOL {branch label 2}
StartSub
RETURN

FinishSub1: {part 1}
SeqLabC
IF NOT FeedConnect?
IF AutoCycle?
ZCP3C
ELSE
IF FIFO? {.81}
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
END
EOL
RETURN

FinishSubG92: {part 2}
SeqLabC Preset ShiftRC EOL
SeqLabC '(ENS)' EOL
CloseSub
SeqLabC Preset UnshftRC EOL
RETURN

OpenMP:
TagInc
IF WorkFixtureOffsets?
NewWFO
EachWFO
SeqLabC SetWFO EOL
SeqLabC '(CLS,L' Tag# ')' EOL
IncWFO
NextWFO
ELSE
SeqLabC 'G10=[T1]V0' EOL {sets temporary register #1 to 0}
SeqLabC 'Q' Tag# '1' EOL {branch label 1}
SeqLabC '(CLS,L' Tag# ')' EOL {call subroutine}
SeqLabC 'G10=[T1]V[T1]+1' EOL {increment register #1 by 1}
SeqLabC 'G11E[T1]=' Parts# 'L' Tag# '2' EOL {if register #1 is equal to number of parts then jump to branch label 2}
SeqLabC 'G11L-' Tag# '1' EOL {jump backwards to branch label 1}
SeqLabC 'Q' Tag# '2' EOL {branch label 2}
END
StartSub
RETURN

CloseMP:
IF WorkFixtureOffsets?
SeqLabC '(ENS)' EOL
CloseSub
SeqLabC WFO1 EOL
ELSE
SeqLabC Preset ShiftPC EOL
SeqLabC '(ENS)' EOL
CloseSub
SeqLabC Preset UnshftPC EOL
END
RETURN

ckHMove:
SetStatusOff
SetFlagF('1')
IF YZPlane?
IF NotEqual? SUB# SPY# ArcI# SUB# ArcI# EPY#
SetFlag('1')
END
ELSE
IF NotEqual? SUB# SPX# ArcI# SUB# ArcI# EPX#
SetFlag('1')
END
END
SetStatusOn
RETURN

ckVMove:
SetStatusOff
SetFlagF('1')
IF XYPlane?
IF NotEqual? SUB# SPY# ArcJ# SUB# ArcJ# EPY#
SetFlag('1')
END
ELSE
IF NotEqual? SUB# SPZ# ArcJ# SUB# ArcJ# EPZ#
SetFlag('1')
END
END
SetStatusOn
RETURN

ckMove:
IF NOT FullArc?
IF XYPlane? AND NOT ZMove?
IF NOT XMove?
ckVMove
ELSE
IF NOT YMove?
ckHMove
END
END
ELSE
IF XZPlane? AND NOT YMove?
IF NOT XMove?
ckVMove
ELSE
IF NOT ZMove?
ckHMove
END
END
ELSE
IF YZPlane? AND NOT XMove?
IF NOT YMove?
ckVMove
ELSE
IF NOT ZMove?
ckHMove
END
END
END
END
END
END
RETURN

FormatArc:
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
IF XYPlane?
IF ZMove?
MoveX MoveY MoveZ ArcIJ 'K' HelixPitch#
ELSE
MoveX MoveY ArcIJ
END
ELSE
IF XZPlane?
IF YMove?
MoveX MoveY MoveZ ArcIJ 'J' HelixPitch#
ELSE
MoveX MoveZ ArcIJ
END
ELSE { YZPlane }
IF XMove?
MoveX MoveY MoveZ ArcIJ 'I' HelixPitch#
ELSE
MoveY MoveZ ArcIJ
END
END
END
RETURN

CkCRC: { 4.2 }
IF LastFeat? { Exit Length Feature }
CRCOffC
ELSE
IF XMove? OR YMove? { Approach Length Feature and Multiple Pockets }
CRCOnC
END
END
RETURN

StdLine: {enables CRC on first call, .70}
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqLabC CkCRC FeedC MoveXYZC FeedRateC EOL
DecelMove2
END
SeqLabC CkCRC FeedC MoveXYZC DecelFeed EOL
ELSE
IF XMove? OR YMove? OR ZMove?
SeqLabC CkCRC FeedC MoveXYZC FeedRateC EOL
END
END
RETURN

ToolPath:
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqLabC MoveSXYC EOL
SeqLabC '(CLS,L' Tag# ')' EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqLabC MoveSXYZC EOL {.80.01}
END
ELSE
IF RapidFeat?
IF AutoCycle?
IF LastFeat?
CRCOffC {.70}
END
SeqLabC RapidC MoveXYZC EOL
ELSE
IF ZMove? AND NOT XMove? AND NOT YMove?
CRCOffC {.82}
END
IF XMove? OR YMove? OR ZMove?
SeqLabC RapidC MoveXYZC EOL
END
END
ELSE
IF LineFeat?
IF AutoCycle? {.70}
IF LastFeat?
SeqLabC CRCOffC FeedC MoveXYZC FeedRateC EOL
ELSE
IF ZMove? {skip CRCOn until first non-Z move line, skipping ramps}
SeqLabC FeedC MoveXYZC FeedRateC EOL
ELSE
StdLine {enables CRC on first call}
END
END
ELSE
StdLine
END
ELSE
IF ArcFeat?
ckMove
IF Flag?('1')
SetFlagF('1')
StdLine
ELSE
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqLabC FormatArc ArcFeedC EOL
DecelMove2
END
SeqLabC FormatArc DecelFeed EOL
ELSE
SeqLabC FormatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
END
IF LastFeat? AND CutterRadiusCompensation? AND NOT AutoCycle?
CRCOffC
IF NOT EmptyLine?
SeqLabC LastFeatExtend EOL
END
END
END
NEXTFeat
RETURN

WFOStuff:
IF NewWFO?
IF MultipleParts?
'*** WARNING *** DO NOT USE NEWWFO() WITH NCPOST MULTIPLE PARTS'
ELSE
'H' NewWFO#
END
ELSE
IF NOT SameTool?
IF NeedWFO1?
'H' NewWFO#
END
END
END
RETURN

AutoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
StartSub
SetSRXYtoSP
SeqLabC IncValue EOL
RETURN

AutoCycCutSub2: {part 2}
ToolPath
SeqLabC AbsOrInc
IF Repeats? AND FeedConnect? AND ZshiftOnly?
{.69 removed RapidC} {.71.2 removed CRCOffC, gets turned off in ToolPath}
ELSE
IF FIFO? {.81}
FeedC ZCP2 FeedEntC
ELSE
RapidC ZCP2
END
END
EOL
SeqLabC '(ENS)' EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

AutoCycPat:
SetPass2 {position pattern}
ToolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN

Milling:
IF AutoCycle?
TagInc
AutoCycCutSub1
EntryMove
AutoCycCutSub2
AutoCycPat
ELSE
EntryMove
ToolPath
END
RETURN

G92Sub:
SubWarning
StdSub
SeqLabC AbsOrInc Connect StrtPos EOL
Milling
FinishSub1
FinishSubG92
RETURN

ZonlyRepAutoCycle:
AutoCycPat {write pattern moves and main calls}
StartSub
TagInc
EachCycle
SetSRXYtoEP
IF FeedConnect?
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqLabC Feed IncValue StrtPosC EOL
SeqLabC AbsOrInc
ELSE
SeqLabC Feed
END
ELSE
SeqLabC Feed
END
ZInPlusInc FeedEnt EOL
ELSE
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqLabC Rapid IncValue StrtPosC EOL
IF FeedEntry?
SeqLabC AbsOrInc ZCP2PlusInc EOL
SeqLabC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLabC AbsOrInc ZInPlusInc EOL
END
ELSE
IF FeedEntry?
SeqLabC Rapid ZCP2PlusInc EOL
SeqLabC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLabC Rapid ZInPlusInc EOL
END
END
ELSE
IF FeedEntry?
SeqLabC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLabC Rapid ZInPlusInc EOL
END
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqLabC '(CLS,L' Tag# ')' EOL
NextCycle
SetStatusOn
AutoCycCutSub1 {build element sub}
AutoCycCutSub2
{.69, removed FinishSub1}
IF FeedConnect? {there is no Z up in the sub, .69}
IF FIFO? {.81}
SeqLabC Feed ZCP2 FeedEnt EOL {.69}
ELSE
SeqLabC Rapid ZCP2 EOL {.69}
END
END {.69}
SeqLabC '(ENS)' EOL
CloseSub
{Element shift, not pattern}
RETURN

ZonlyRep:
EachCycle
IF NOT FirstCycle?
SeqLabC Connect StrtPos EOL {.71.2, added Connect}
END
IF FeedConnect?
SeqLabC FeedC ZInPlusInc FeedEnt EOL {.71.2, changed to FeedC}
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqLabC RapidC ZCP2PlusIncC EOL {can't call for cycle =1} {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
SeqLabC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqLabC RapidC ZInPlusInc EOL {.69 added Rapid, reads better} {.71.2, changed to RapidC, reads better}
END
END
SeqLabC '(CLS,L' Tag# ')' EOL
NextCycle
StartSub
SkipZ
ToolPath
UnSkipZ { Moved from FinishSub1 }
FinishSub1
SeqLabC '(ENS)' EOL
CloseSub
RETURN

CheckPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN

GetStartOfSameTool:
DoOpComments
DoPostScript
CheckPass
RETURN

{Start of executable Prog **************************************************}

{setup and initializations}
InitProg
ReverseXZArcs
InitWFONum
SetFlood
UseSeparateSubCalls
SetMaxSeparateSubCalls('50')
SetMaxRPM('10000')
SetMaxFeed('500')
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' EndOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
' NewWFO(56), NWFO(56) -' EOL
' The Work Fixture Offset # you specify will be used for all following operations.' EOL
' Do not use with the ncPost multiple part option.' EOL
' 4thAxisCW(12.5), 4ACW(12.5) -' EOL
' generates a + A move of the value you specify' EOL
' 4thAxisCCW(22.5), 4ACCW(22.5) -' EOL
' generates a - A move of the value you specify' EOL
' 5thAxisCW(30), 5ACW(30) -' EOL
' generates a + B move of the value you specify' EOL
' 5thAxisCCW(22.5), 5ACCW(22.5) -' EOL
' generates a - B move of the value you specify' EOL
END
EachOp {Start of post processing *********************}
IF FirstOperation?
EOR EOL
IF ToolChangeAtHome?
SetHome
END
IF UseComments?
IF ProgramNameComment?
'(MSG, PROGRAM: ' ProgramName$ ' )' EOL
END
IF ProgramComment?
'(MSG, ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'(MSG, FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'(MSG, ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'(MSG, OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'(MSG, PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'(MSG, FIRST TOOL NOT IN SPINDLE )' EOL
END
END
OpenSub
RestoreScale
IF MultipleParts? AND AllToolsOnePart?
OpenMP
END
DoOpComments
DoPostScript
':' Rapid OpToolID ToolChng EOL
SeqLabC Plane CRCOff 'G60' 'G70' DrillOff AbsOrInc 'G94' 'H0' EOL { Inch, Inches Per Minute }
IF MultipleParts? AND OneToolAllParts? AND FullUp?
OpenMP
END
CheckPass
SeqLabC Plane AbsOrInc Rapid StrtPos GetIndex Speed WFOStuff SpinOn EOL
SeqLabC ZCP1 CoolOn EOL
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
OpenMP
SeqLabC StrtPos EOL
END
ELSE
IF NewTool?

{Finish off last Operation}

IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
CloseMP
END
SeqLabC CoolOff EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
SeqLabC 'M26' EOL
CloseMP
END
DoEndOpPS
IF ToolChangeAtHome?
IF MultipleParts? AND OneToolAllParts? AND FullUp?
{ we are already at full retract }
ELSE
SeqLabC 'M26' EOL
END
SeqLabC Rapid Home EOL
END
IF LAST ProgStop?
SeqLabC 'M0' EOL
ELSE
SeqLabC ProgStop EOL
END

{Start new Operation}

DoOpComments
DoPostScript
':' Rapid OpToolID ToolChng EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
OpenMP
END
CheckPass
SeqLabC Plane AbsOrInc Rapid StrtPos GetIndex Speed WFOStuff SpinOn EOL
SeqLabC ZCP1 CoolOn EOL
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
OpenMP
SeqLabC StrtPos EOL
END
ELSE
IF SameTool?
DoEndOpPS
IF LAST ProgStop?
SeqLabC CoolOff EOL
SeqLabC 'M26' EOL
SeqLabC 'M0' EOL

{Start new Operation}

GetStartOfSameTool
SeqLabC PlaneC AbsOrInc Rapid StrtPos GetIndex Speed WFOStuff SpinOn EOL
SeqLabC ZCP1 CoolOn EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
SeqLabC CoolOff EOL
END
IF NewToolOffset?
SeqLabC 'G98Z25.D0' EOL { Machine Coordinates }

{Start new Operation}

GetStartOfSameTool
SeqLabC PlaneC AbsOrInc Rapid StrtPos GetIndex SpeedC WFOStuff EOL
SeqLabC ZCP1 EOL
ELSE

{Start new Operation}

GetStartOfSameTool
SeqLabC PlaneC AbsOrInc Rapid StrtPos GetIndex SpeedC WFOStuff EOL
END
IF NOT CoolOff? AND LAST CoolOff?
SeqLabC CoolOn EOL
END
END
END
END
END {common point for all operations}
IF Milling?
SeqLabC ZCP2C EOL
IF Repeats?
TagInc
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
ZonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
FindAnyZMoves {for normal abs subroutine}
IF NoZMoves?
ZonlyRep
ELSE
G92Sub {pattern shift, not element}
END
ELSE {no sep subs desired}
G92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
G92Sub
END {end Z only IF}
ELSE {no repeat OPs}
Milling
END
IF AutoCycle?
SeqLabC ZCP3C EOL
ELSE
IF FIFO? {.81}
SeqLabC FeedC ZCP3C FeedEntC EOL
ELSE
SeqLabC RapidC ZCP3C EOL
END
END
ELSE
IF Drilling?
IF Repeats?
TagInc
StdSub
SeqLabC AbsOrInc Rapid StrtPos EOL
END
SeqLabC DrillCP EOL
GetCycle
SeqLabC
IF FIFO? AND Dwell? { Bore/Ream with Dwell }
'G89'
ELSE
Cycle
END
IF Peck?
IF PeckChipBreaker?
'J0'
ELSE
'J1'
END
ELSE
IF Tap? AND OptCyc1?
'J2'
END
END
StrtPos
'Z' ADD# ZDepth# NumSc#('.1') {Z depth is incremental from R value}
RLevelCin {R value is ZCP2 -.1}
IF RetractToCP1?
'W' CP1LessCP2#
END
Peck FeedEnt EOL
TrackZNO# FIRST SPZ# {.81.2}
ToolPath
IF RetractToCP1? {.81}
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
SeqLabC DrillOff
IF Tap? AND OptCyc1?
'J0'
END
ZCP3 EOL
IF Repeats?
FinishSubG92
END
SeqLabC RapidC ZCP3C EOL
END
END
NextOp {loops back to EachOP until last Operation}

{End of program ************************************************************}

{finish last operation}
IF MultipleParts? AND OneToolAllParts? AND ExitClearancePlane?
CloseMP
END
SeqLabC CoolOff EOL
IF MultipleParts? AND OneToolAllParts? AND FullUp?
SeqLabC 'M26' EOL
CloseMP
END
DoEndOpPS
IF FIRST ToolChangeAtHome? {.71.2 added FIRST modifier}
IF MultipleParts? AND OneToolAllParts? AND FullUp?
{ we are already at full retract }
ELSE
SeqLabC 'M26' EOL
END
SeqLabC Rapid FirstHome EOL
END
IF MultipleParts? AND AllToolsOnePart?
IF ProgStop?
SeqLabC 'M0' EOL
END
CloseMP
END
IF MultipleParts? AND OneToolAllParts? AND FullUp?
{ we are already at full retract }
ELSE
IF FIRST ToolChangeAtHome?
{ we are already at full retract }
ELSE
SeqLabC 'M26' EOL
END
END
SeqLabC Rapid 'G98X20.Y20.H0' EOL
SeqLabC EOP 'M52' EOL { Unload Last Tool }
CloseSub
Post2 {organize Subs into one program}
IF UseComments?
SetScale('1') {restore scale for comments}
IF FileBytesComment?
'(MSG, FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'(MSG, FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'(MSG, FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
END
EOR EOL
Close
ReTag


Wyszukiwarka

Podobne podstrony:
Cin Acr 850 SX [WF] L592 85
Cin Acr 850 SX L315 85
Cin Acr 850MC [RI] M664 87
Cin Acr 850 SX L315 85m
Cin Acr 850 SX (DSM) L481 85m
Cin Acr 850SX [WI] M700 87
Cin Acr 850 SX [WT] L381 85 3
Cin Acr 850 SX [STM] L437 85 10
Cin Acr 850 SX [D&H] L602 85
Cin Acr 850 SX R [MOP] L675 85
Cin Acr 850 SX [WSR] L583 85 1
Cin Acr 850 SX [AG] L590 85 8
Cin Acr 850MC [SJ] M494 87
Cin Acr 850 SX [STM] L437 85 9m
Cin Acr 850 SX [SI] L324 85 5
Cin Acr 850 SX [CS] L519 85 1
Cin Acr 850 TC [IM] L289 85

więcej podobnych podstron