Note: Combination and BSI with the same km Must be programmed stand!

                 Use the following board and bracket
* Build the combined instrument and disassemble it.
* Locate the 8 pin connector chip 93c46.
* Perpendiculars from this chip.

* Connect the clip to Port 0
* Set the bracket on the chip 93C46 (red on pin 1)
* Select the DIGA-Consult Speedometer C46 Citroen C3
* The DIGA-Consult shows you the old Kilometers to.
* Select menu, KM others.
* Enter the new KM-stand.
* Confirm the new KM-stand with OK.
* Build now BSI first module and then the combined instrument again.

---