WARNING; Nero's install wizard has detected the presence on

your machine of the following out of date driver -- Ultra2W

miniport driver AIC78U2.MPD. INSTALLATION OF NERO ON A

MACHINE CONTAINING THIS DRIVER COULD RESULT IN SEVERE

COMPLICATIONS UPON THE RUNNING OF NERO, INCLUDING

SYSTEM HANGS WHICH MAY CAUSE YOUR COMPUTER TO STOP FOR

30 SECONDS EVERY FEW MINUTES WHICH MAKES YOUR COMPUTER

UNUSABLE!

To avoid these problems, you should TAKE EACH OF THE

FOLLOWING STEPS:

1. copy or print out these instructions.

(file: \nero\Misc\w2222.ans)

2. quit installation of Nero.

3. update your current Ultra2W miniport driver

'AIC78U2.MPD' to a version dated

3.03 4.10.0.2000 or later

Because your 'AIC78U2.MPD' 3.02 4.10.0.2222 seems to have

a "higher" version, the Windows installation routine

refuses to load the new 'AIC78U2.MPD' 3.03 4.10.0.2000

with the recommended selection method.

Choose the alternative method instead.

(at the time of release, an

appropriate update was available free of charge from

Adaptec, Inc.'s web site at

ftp://ftp.adaptec.com/scsi/windows/7800w9x.exe).

Please review the terms of downloading products from

Adaptec Inc. by reviewing information on Adaptec's home

page (http://www.adaptec.com).

4. upon successful installation of the updated driver,

reboot your system (if installation of the updated

driver has not already required you to do so).

WARNING: FAILURE TO COMPLETE A REBOOT PRIOR TO

INSTALLATION OF NERO COULD LEAD TO THE PROBLEM

DESCRIBED ABOVE.

5. Following reboot, proceed to install Nero. You will

not receive this warning again if you have successfully

updated your miniport driver.