MR293R190'6 1

REM07AL

See "GENERAL - Tools and products".

Remove:

- the moulding, starting to unclip tt at. one of the two upper corners?

-    the moulding support, starting either at the lower join or at the upper cornera by cutting the corners;

-    the two lower blocks whlch are stuok on the aperture.

Stick a strip of adhesive tape over the edge of the roof and on the windscreen aperture.

Fit the dashboard protector.

Pass a piece of steel wire approximately 30 om long through the bead of mastic at one of the two vertical sidea.

IHPORTANT:    Before flttlng the pricking

tool and puliing handle, consult the section entltled "GENERAL - TooJLing".

Cut the bead of ma3tic.