MR293R190–6 1

MR293R190–6 1



PRKPARIHG AND PAINTINC METHOD

-    Degreaee.

-    Rub down the new part with P320 paper, used dry, nr with a red nylon abrasivc pad.

-    Mask off i£ necessary.

-    Apply phoephating primer to the bare metal.

-    Apply surfacing mastic or primer if neceeaary.

-    Rub down with a bÅ‚ock and P150 paper used dry then P240 paper used dry.

-    Apply finishing primer (one-pot).

-    Antl-corrosion protection (see page 90-6 for products and use).

FRONT INPACT

Extruded and/or sprayed-on mastic.

sprayed-on mastic.




Wyszukiwarka

Podobne podstrony:
MR293R190?6 1 PRKPARIHG AND PAINTINC METHOD -    Degreaee. -    Rub do
MR293R190?1 1 PREPARAT10N AND PAINTIHG METHOD -    Degrease. -    Rub
MR293R190?1 1 PREPARAT10N AND PAINTIHG METHOD -    Degrease. -    Rub
40239 MR293R190?1 1 PREPARAT10N AND PAINTIHG METHOD -    Degrease. -   &nbs
MR293R190?8 1 PREPARATIOH AND PAIHT SEQOEHCK -    Degrease. -    Rub d
MR293R190?8 1 PREPARATIOH AND PAIHT SEQOEHCK -    Degrease. -    Rub d
MR293R190?8 1 PREPARATIOH AND PAIHT SEQOEHCK -    Degrease. -    Rub d
MR293R190?4 1 PREPARATION AND PAINTING METHOD *This method is also valid and recoraraended for repai
40567 MR293R190?4 1 PREPARATION AND PAINTING METHOD *This method is also valid and recoraraended for
cp 34 What inspiration U thcrc to betler and dcancr methods of life. in the spectaclc of a musde-bou
47879 tmta4 Lacing and eyelets16. Working eyelets Trim down the seam allowances and hem or top stit
24. A well is to be fracture stimulated down the production casing with the following conditions: Fr
60169 Suzuki RM2509 FRONT FORK AND STEERING 15-13 ♦    Clamp the axle holder @ with
REIDER PART 255 Chapter 8 Cervical and Thoracic Spine 315 respond to the dermatome associatcd with
Suzuki RM2505 FRONT FORK AND STEERING 15-19 ♦ Install the new oil seal ® with the special tool unti

więcej podobnych podstron