{\rtf1\ansi\ansicpg1252\deff0\deflang2057{\fonttbl{\f0\fnil MS Sans Serif;}{\f1\fnil\fcharset0 MS Sans Serif;}{\f2\fswiss\fcharset0 Helvetica;}}
{\colortbl ;\red255\green0\blue0;}
\viewkind4\uc1\pard\qc\cf1\b\f0\fs20 CYCLE\f1 72 Contour Milling
\par \pard
\par \cf0\b0\f2 Use CYCLE72 to mill along any contour defined in any contour defined in a subroutine.
\par The cycle operates with or without cutter radius compensation.
\par It is not imperative that the contour is closed. Internal or external machining is defined via the position of the cutter radius compensation (centrally, left or right to the contour).
\par The contour must be programmed in the direction as it is to be milled and must consist of a minimum of 2 contour blocks (starting and end point), since the contour subroutine is called directly internally in the cycle.\cf1\b\f1
\par \pard\qc\cf0\b0\f2
\par }