This file documents changes in the software, firmware and hardware of the AVR-Doper project. New entries are always appended to the end of the file. Scroll down to the bottom to see the most recent changes. * Release 2006-07-18 - Added compatibility macros to allow ATMega88 instead of ATMega8. - Ignore synchLoops parameter in ISP mode since avrdude sometimes sends 0. - Changed default ISP clock speed to 2 (instead of fastest). * Release 2006-09-12 - Added patch for avrdude to support HID mode. - Updated Readme file with information about HID mode and avrdude. * Release 2006-10-23 - Fixed bug in ISP value polling. Value polling is used when programming older devices such as the AT90S8515. * Release 2007-02-01 - Updated to newest AVR-USB driver version. - Connected pins 2 and 3 of 8 pin programming socket because these pins are swapped on some devices. - License is now GPL2 * Release 2007-03-29 - Insert "Load Extended Address" command when bit 31 of address is set. - avrdebug accepts keyboard input now. - avrdebug works in HID mode and CDC mode now. * Release 2007-08-07 - Fixed serious bug in SPI-MULTI command. When reading fuses, AVR-Doper sent 256 uninitialized bytes (content of last buffer) to the device which could have unpredictable effects (including chip erase or similar nasty things). - Fixed bug in HVSP circuit: 14 pin socket must connect pins 11, 12 and 13 to GND in order to enter HVSP mode. - Updated to new USB driver. * Release 2007-12-01 - Added avrdoper-vista.inf file for Windows Vista. - Switched back to old hvspEnterProgmode() routine -- seems to work more reliably than the one described in the ATTiny45 data sheet. * Release 2008-02-05