WORKS
Q Initial preparatlons □
• Ensure harbour securing pins are removed.
• Disconnect electhcal charge cabłe.
• Close draln plugs. --ą-Pr
• Place E PI R.B
and S.A.R.T. 1-7*v ‘A/ ll In——
in boat. -_A. Sr*
• Board when łnstructed, sit and fasten seat belts.
Launch actions
• Release grlpes/securing wires
• Secure hatches.
• If ki a safe atmosphere, open vents.
• Suitable jackets (łnflatabłe) are / to be wom by / the boats Łj crew.
Lower to water
• Check dear below.
2 Entering water
• Allow boat to settle in the water
• Operate brake release.
•Boat may swing during launch.
• Keep
lowering L
boat at a steady \
ratę.
• Keep brake off.
• Release talłs.
• If falls do not disengage, operate emeraency release as follows:-
1) Break glass.
2) Move lever to green zonę.
3) Release falls.
|Ejj Lettlng go
•Start engine.
• If in a dangerous atmosphere, open air supply and water spray valves.
• Release painter when ready.
• Steer away from shlp.
Finał actions
• Rescue any swimming survivors łf safe to do so.
•When dear of vessel, stream sea anchors.
Operate
E.P.I.R.B.
and
S.A.R.T.