11709 Suzuki RM2504

11709 Suzuki RM2504



EXHAUSTVALVE 11-5

♦    Remove the exhaust valve shaft ®.

♦    Remove the tollowing parts.

@ Spacer

® Exhaust valve arm ® Spring

<D Right exhaust sicie valve rod ® Left exhaust side valve rod


Remove the retainer (9) and the exhaust main valve ®.


INSPECTION    ,    -s, \

♦    Remove carbon deposits from the exhaust yalvęs andcompó- ’

nent parts.    <f'\ \ V \ \ \

♦    Inspect the exhaust valves for wear and ąęratćhęś, v;'


/W


' V


V-


■N


I .' U"

f i

C::y



* Inspect the return spring for spring tension and damage.

REASSEMBLY

Reassemble the exhaust valve in the reverse order of disassem-bly. Pay attention to the following points:

*    Apply transmission oil to the exhaust side valve rods.

*    Install the exhaust side valve rods into the cylinder.

NOTĘ:

Make surę that the yellow painted valve rod ® is instalted on the right and the white painted valve rod (2) is installed on the left.


•miś



Wyszukiwarka

Podobne podstrony:
suzuki rm25014 EXHAUSTVALVE 11-5 EXHAUSTVALVE 11-5 Remove the retainer © and the exhaust main valve
72111 Suzuki RM2508 EXHAUSTVALVE 11-9 • Disassemble the governer assembly by pushing down the retai
Suzuki RM2506 EXHAUSTVALVE 11-7 ♦    Temporarily tighten the bolts ®. ♦   
suzuki rm25015 11-6 EXHAUSTVALVE •    Apply transmission oil to the exhaust valve sh
suzuki rm25016 EXHAUSTVALVE 11-7 •    Temporarily tighten the bolts ®. •   
suzuki rm25018 EXHAUSTVALVE 11-9 Disassemble the governer assembly by pushing down the retainerINSP
Suzuki RM2500 EXHAUSTVALVE 11-1EXHAUST VALVE -CONTENTS- CONSTRUCTłON
Suzuki RM2509 ELECTRICAL SYSTEM 17-3 Measure the ignition system peak voltage in the following proc
Suzuki RM250) PERIODIC MAINTENANCE 2-13CLUTCH Adjust the clutch cable play as follows:MAJOR ADJUSTME
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
suzuki rm25082 REAR SUSPENSION 16-9 •    Inspect the spacers and dust seals for dama
suzuki rm25099 ELECTRICAL SYSTEM 17-3 Measure the ignition system peak voltage in the following pro
20536 Suzuki RM250? 9-12 FUEL SYSTEMINSPECTION •    Inspect the following parts for d

więcej podobnych podstron