266 (13)

Załącznik 2 cd.

PART IV    s.s/m.v............................

For condition whan vessel shdfts betwean.......... and ...........

in accordance with 46 CFR 93.20-20 and Table 93.17-15 shown below.

TABLE 93.17-15 - CALCULATION OF SM SM = L x TABULAR VALUE (2)

where:

L * Total lengłyt of sTack surfaces © B = Max imum breadth of slack surfaces

t> = PispTacement of vassel in 1,000 long tons (Tabular yaluet If the ratio of avaliable freeboard to beas is ■ora than 9.248, tlie reguired 6H in order to shift the vessel shall ba calculated by aultiplying tha applicable figura belo* by tha total length of siad surface. If the ratio found above is lass than 1.248, the tabular yalues shall be adjusted by ■ultiplying by 9.248 and diyiding by the actual ratio found.) ©

Di spłacę-    Breadth (feet)

■ant of yassal (in 1,191 long

tons)    18    45    59    55    48    45    79    73    89    83    9995    199

19    .9994    .9134    .8184    .8244    .9317    .9493    .9594    .9419    .9732    .8992    .1979    .1258    .1448

29    .8947    .9847    .8092    .8122    .8159    .8282    .9252    .9319    .9374    .9451    .9535    .8429    .8734

39    .9931    .9945    .9941    .8981    .9194    .9134    .9148    .8294    .9251    .9391    .9337    .9429    .9489

49    .9923    .8933    .8844    .8941    .9979    .9191    .9124    .9153    .9188    .9225    .9248    .9315    .9347

59    .8819    .8827    .9938    .9949    .9943    .9881    .9181    .9124    .9139    .9188    .9214    .9252    .9294

49    .9814    .9822    .8831    .8841    .9933    .9847    .9884    .9183    .9125    .9158    .8178    .9218    .9245

79    .8913    .8819    .8924    .8835    .9845    .9858    .8872    .8988    .9187    .9129    .9153    .9189    .9218

89    .9812    .8917    .9823    .8831    .9948    .9858    .8943    .9977    .9894    .8113    .8134    .9157    .9184

99    .8910    .8815    .8928    .8927    .8835    .8845    .8854    .8849    .9884    .0198    .8119    .9149    .9143

198    .9899    .8813    .8818    .9824    .9832    .9849    .9959    .9942    .8975    .8999    .9197    .9124    .9147

NOITS. - In those portions of length uhich are diyided by a centerlinę bulkhead 1/4 of the tabular value uy be used. (3)

The table is calculated for aheat. If necessary the 4H aay be adjusted for other grains by

■ultiplying by the folloeing factors: ©

Stotage Factor    approjci»atly    59 corn,    rye, soyabeans ............. 8.9

Stoaagt Factor    approxi«atly    54 barly............................ 0.8

Stouage Factor    approxi»atly    79 oats............................. 9.4

Least displaoeaent in long tons.............. Stoeage Factor...

Draft at above displaceaent .............. Baaa ...

Freeboard

Fraeboard at above displaceaent ............ Freeboard Ratio: .........

Beaa

madę by voyteck (dec'2004)

266