89 TransAlp Manual General Specifications Air Flow 1

89 TransAlp Manual General Specifications Air Flow 1



“i

GENERAL INFORMATION

EMISSION CONTROL SYSTEMS

The U.S. Environmental Protection Agency and California Air Resources Board ICARBI require manufacturers to certify that their motorcycles comply with applicable exhaust emissions standards during their useful life, when operated and maintained nccording to the instructions provided. and that motorcycles built after January 1, 1983 comply with applicable noise emis sion standards for one year or 6,000 km 13,730 miles) after the time oł sale to the ultimate purchaser, when operated and maintained according to the instructions provided. Compliance with the terms of the Distributor's Limited Warranty for Honda Motorcycle Emission Control Systems is necessary in order to keep the emissions system warranty in effect.

SOURCE OF EMISSIONS

The combustion process produces carbon monoxide and hydrocarbons. Control of hydrocarbons is very important because, under certain conditions, they react to form photochemical smog when subjocted to sunlight. Carbon monoxide doas not react in the same way, but it is toxic.

Honda Motor Co., Ltd. utilizes lean carburetor settings as well as other systems, to reduce carbon monoxide and hydro carbons.

CRANKCASE EMISSION CONTROL SYSTEM

The engine is equipped with a closed crankcase system to prevent discharging crankcase emissions into the atmosphere. Blow-by gas is returned to the combustion chamber through the air cleaner ond the carburetor.



1-14


Wyszukiwarka

Podobne podstrony:
89 TransAlp Manual General Information 1 1 1. GENERAL INFORMATION GENERAL SAFETY 1-1 SERVICE RULE
89 TransAlp Manual General Information 1 2 GENERAL INFORMATIONMODEL IDENTIFICATION 1) VEHICLE IDENTI
89 TransAlp Manual Front Wheel Suspention Steering 6 FRONT WHEEL/SUSPENSION/STEERINGINSPECTION• AXL
89 TransAlp Manual General Specifications Emission Control 1 GENERAL INFORMATION GENERAL INFORMATIO
89 TransAlp Manual General Specifications Emission Control 1 GENERAL INFORMATIONEMISSION CONTROL IN
89 TransAlp Manual General Specifications Major Component Locations 1 (1) MAIN W1RE HARNESS ) TURN
89 TransAlp Manual General Specifications Major Component Locations 1 GENERAL INFORMATION 131 WATER
89 TransAlp Manual General Specifications 1 3 GENERAL INFORMATIONSPECIFICATIONS ITEM SPECIFICATION
89 TransAlp Manual General Specifications 1 4 GENERAL INFORMATION <    >: Calif
89 TransAlp Manual General Specifications?ble Routing 1 9 GENERAL INFORMATION GENERAL INFORMATION r#
89 TransAlp Manual General Specifications Lubrication 2 0 LUBRICATION <1) ROCKER ARM <13) CAMS
89 TransAlp Manual General Specifications Lubrication 2 1 I A «T* <% <r%2. LUBRICATION SERVI
89 TransAlp Manual General Specifications Lubrication 2 LUBRICATIONLUBRICATION POINTS Use generał p
89 TransAlp Manual General Specifications Lubrication 2 2 LUBRICATIONTOOLS Specłal OH filier wrench
89 TransAlp Manual General Specifications Lubrication 2 3 LUBRICATIONf—€—€ENGINE OIL LEVEL CHECK Sup
89 TransAlp Manual General Specifications Lubrication 2 4 Remove the oil filter with a filter wrench
89 TransAlp Manual General Specifications Lubrication 2 5 LUBRICATION LUBRICATIONOILPUMPPRESSURE REL
89 TransAlp Manual General Specifications Lubrication 2 6 LUBRICATIONLUBRICATION Remove the oil stra
89 TransAlp Manual General Specifications Lubrication 2 7 LUBRICATION LUBRICATION Temporarily instal

więcej podobnych podstron