89 TransAlp Manual General Specifications Lubrication 2 8

LUBRICATION

Install the outer rotor to the oil pump body with the punch mark facing the cover.

Install the inner rotor.

Install the drive pin and washer to the oil pump shaft.

Install the oil pump shaft to the oil pump body, aligning the drive pin with the groove of the inner rotor.

Install the dowel pin and a new gasket to the oil pump body. Install the oil pump cover to the pump body.

(1) OIL PUMP BODY 12) DOWEL PIN

14) GASKET

(3) OIL PUMP COVER

Install the O-rings, oil seal, oil strainer and oil pipę to the oil pump.

CAUTION

• Install the O-rings to the oil pipę with the tapered sides facing out as shown, or the engine will be damaged.

(1) OIL STRAINER