BOWS STEP BY STEP  jpeg

Measure ribbon at one end for taił length. Measure for collar length indicated. Cross ribbon ends over to form collar shape.

SINGLE LOOP COLLAR BOW

Flve Sizes

Refer to General Information and Instructions on pages 3-4.

Tie wire needed to secure bows

Recheck chart for taił length and collar

Refer to chart for length of ribbon and special instructions for bow desired. Measure ribbon at both ends for taił length. Holding ribbon at that position on each end of ribbon, cross ends over to form a collar shape.

Gather ribbon together at center. Place ti© wire under your thumb with one end ex-tending approximately 2" beyond thumb. Bring wires to back of bow Hołd tie wire tightly and twist bow to secure.

Trim tails in shape desired.

DOUBLE LOOP COLLAR BOW

Four Sizes

Tle wire needed to secure bows

Refer to General Information and Instructions on pages 3-4.

Refer to chart for length of ribbon and special instructions for bow desired.

Bring ribbon cross to center back of collar.

Take long end to back of bow forming a loop.

Bring long end over to the front of bow mak-ing another loop.

Gather ribbon together at center. Place tie wire under thumb with one end extending approximately 2" beyond thumb. Bring wires to back of bow. Hołd tie wire tightly and twist bow to secure. Trim tails in shape desired.

		SINGLE LOOP COLLAR BOW
Apptox. Finished	Ribbon	Yatdage	Taił	Collar	Appioi. Lnngth ot
Olamoter	SIZO	Needed	Length	Slzo	Flmshod Tali*
4”	No. 5	'/ł	4"	10"	4"
4"	No. 9	Vi	3"	12"	3"
7V't’	No. 16	1	9"	IB"	9"
7Vz"	No. 40	1	9"	18'	8"
16"	8 inch	2	18"	86"	16"
		DOUBLE LOOP COLLAR BOW
4"	No. 5	1	4’*	2 a: 10"	4"
5"	No. 9	1	6"	2 a: 12	5"
8"	No 16	1 V.	10”	2 at 20"	9"
9"	No. 40	2	12”	2 at 24"	11"

15