277
BRAKE HYDRAULIC LINĘ
.Inspection.
Removal and Installation.
CAUTION:
a. When removing and installing brake tubę, use Tool.
b. Cover openings to prevent entrance of dirt whenever disconnecting hydraulic linę.
• To remove brake hose, first remove flarę nut securing brake tubę to hose, then withdraw lock spring. Next disconnect the other side.
Do not twist brake hose.
Check brake lines (tubes and hoses) for cracks, deterioration or other damage. Replace any dam-aged parts.
If leakage occurs around joints, re-tighten or, if necessary, replace damaged parts.
Wyszukiwarka
Podobne podstrony:
Suzuki RM125p 5-6 ENGINE REMOVAL AND INSTALLATION • Remove the cotter pin ® and br
SMREAR DRUM BRAKE (LT18B) ___Removal and Installation- of Adjuster When installing, measure inner di
WINDSHIELD AND WINDOWS_Back Door Window (Cont d)_ REMOVAL AND INSTALLATION FOR UNBROKEN
ENGINE COOLING SYSTEM _Water Pump_ REMOVAL AND INSTALLATION • When removing water
18581 Suzuki RM125g ENGINE REMOVAL AND INSTALLATION 5-3ENGINE REMOYAL AND INSTALLATIONREMOVAL ♦ &nbs
43 35f0af85c8 INSP ADJ COWLINGS REMOVAL AND INSTALLATfiON COWLINGS Removal 1. Remove: *Lower cowling
NS/GS9 - 58 ENGINE- REMOVAL AND INSTALL ATI ON (COfltmued) Fig. 30 Mess uring Platon Protmaion Mao
Suzuki RM125f 5-2 ENGINE REMOVAL AND INSTALLATIONEXTERIOR PARTS ! / 7*" K&q
Suzuki RM125h 5-4 ENGINE REMOVAL AND INSTALLATION • Remove the exhaust pipę fiłting springs with the
Suzuki RM125r 5-8 ENGINE REMOVAL AND INSTALLATIONINSTALLATION • Reassemble the rem
36818 Suzuki RM125q ENGINE REMOVAL AND INSTALLATION 5-7 engine mounting bolts and plates swlngarm pi
39359 Suzuki RM125s ENGINE REMOVAL AND INSTALLATION 5-9 * Reassemble the drive Chain clip so the sli
25719 Suzuki RM125i ENGINE REMOVAL AND INSTALLATION 5-5 ♦ Disconnect the radiator
więcej podobnych podstron