89 TransAlp Manual Electric Starter 6

ELECTRIC STARTER

Install the shims in the same location and number when disas-sembled.

Install the O-ring onto the case.

Install the lock washer, aligning its tabs with the slots in the front cover.

Apply grease to the dust seal.

Install the front cover.

(11 DUST SEAL

(3) TABS

121 FRONT COVER

(71 O-RING

\    (4) SLOTS^

(5) LOCK WASHER

(61 SHIMS

Align the index marks on the front cover, case and rear cover as shown.

Tighten the two mounting bolts securely.

Apply oil to the O-ring and install it onto the front cover.

(3) BOLTS

INSTALLATION

Install the starter motor to the engine.

Install and tighten the motor mounting bolts securely.

NOTĘ

• Connect the ground cable to the starter motor with one mounting bolt as shown.

(11 TERMINAL,

BATTRY

CABLE

NEGATIVE i

(4) MOTOR CABLE

Connect the motor cable to the motor terminal. Install the rubber cap to the terminal.

Connect the battery negative cable.

STARTER RELAY SWITCH

OPERATION INSPECTION

Depress the starter switch button with the ignition ON. The coil is normal if the starter relay switch clicks.

18-6

(31 GROUND CABLE

(2) BOLTS