89 TransAlp Manual Lights Instraments Switches 7

LIGHTS/INSTRUMENTS/SWITCHES

9 ^ł» #1 r i

r>

r>

LEFT HANDLEBARS SWITCH

DIMMER SWITCH

TERMINAL	HL	Lo	Hi
Lo	O—	—O
(N)	O—	—O—	—O
Hi	O—		—O
COLOR	Bu/W	W	Bu

TURN SIGNAL SWITCH

TERMINAL	W	R	L
R	0—	—o
N
L	o—		—O
COLOR	Gr	Lb	0
HORN SWITCH
TERMINAL	Ho	BAT6
FREE
PUSH	O—	—O
COLOR	Lg	BI

OIL PRESSURE SWITCH

Make surę that the oil warning light comes on with the ignition switch "ON”.

(1) DIMMER SWITCH

(3! TURN SIGNAL

(2> HORN SWITCH

(i> OIL WARNING LIGHT

i

9)

9)

"ON".

If the light does not come on, inspect as follows.

Remove the drive sprocket cover.

Disconnect the oil pressure switch wire from the switch by re-moving the terminal screw.

Short it to ground using a jumper wire. Tum the ignition switch

The oil warning light should come on.

If the light does not come on, check the bulb, sub fuse <1 5 A) and wires for a loose connection or an open Circuit.

Start the engine and make surę that the light goes off. If the light does not go off, check the oil pressure fpage 2-4).

If the oil pressure is normal, replace the oil pressure switch with a new one (page 2-4).

19-7